Stra P. Projectors for architectural lighting of large building exteriors

Technical data

Updated to PS10101FMH

kg 6,00
IP66
IK10

Installation	projector for outdoor applications
Power consumption	37W
Power supply	230Vac
Lumen output at source	3152 lm (3000K, CRI >90)
Delivered lumen output	1619 lm (3000K, 30°, CRI >90)
Datasheet	Stra P 1.0 code: PS10101FMH projector for outdoor applications; surface mounted (ceiling, wall, floor); Power consumption: 37W; Power supply: 230Vac; Lumen output at source: 3152 lm (3000K, CRI >90); Delivered lumen output: 1619 lm (3000K, 30°, CRI >90); 4 high-intensity power LEDs, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C); LED colour: 2700K; Optics: 30°: optical system consisting of a high-efficiency, deep-set TIR lens combined with a high-quality technical filter; CRI Colour Rendering Index: >90; Body material: body made of die-cast aluminium. Trim in AISI 316L stainless steel, made with a CNC lathe then micro-blasted, passivated and electropolished to guarantee excellent corrosion resistance. Bracket in AISI 316L stainless steel, tumble finished and painted; Finishes: anthracite finish on body obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector; Screen material: 15-mm-thick tempered, transparent extra-clear glass, with vitrified serigraphy, to ensure chromatic uniformity of light and excellent resistance to knocks and scratches; built-in power supply unit; includes 1.5 m neoprene cable H05RN-F 3x1,0 Ø7 mm; Control system: ON/OFF; Ingress protection: IP66; Impact resistance: IK10; 66°x11° optics adjustable through 360º using the magnet provided; DALI version available on request; Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content; The SPD (Surge Protection Device) protects lighting fixtures from electrical phenomena external to the system, such as power surges. In particular, this device is specifically for protection against serious events with a high energy content; Operating temperature: -20°C — +45°C; Glow wire test: 960°; Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006; Appliance class: class I; Weight: 6000 g; Dimensions: Ø252x138 mm; Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012; Accessories: WH0610 Honeycomb louvre, WN7100 Anti-fall kit; tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumptionStra P 1.0 code: PS10101FMH projector for outdoor applications surface mounted (ceiling, wall, floor) Power consumption: 37W Power supply: 230Vac Lumen output at source: 3152 lm (3000K, CRI >90) Delivered lumen output: 1619 lm (3000K, 30°, CRI >90) 4 high-intensity power LEDs, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C) LED colour: 2700K Optics: 30°: optical system consisting of a high-efficiency, deep-set TIR lens combined with a high-quality technical filter CRI Colour Rendering Index: >90 Body material: body made of die-cast aluminium. Trim in AISI 316L stainless steel, made with a CNC lathe then micro-blasted, passivated and electropolished to guarantee excellent corrosion resistance. Bracket in AISI 316L stainless steel, tumble finished and painted Finishes: anthracite finish on body obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector Screen material: 15-mm-thick tempered, transparent extra-clear glass, with vitrified serigraphy, to ensure chromatic uniformity of light and excellent resistance to knocks and scratches built-in power supply unit includes 1.5 m neoprene cable H05RN-F 3x1,0 Ø7 mm Control system: ON/OFF Ingress protection: IP66 Impact resistance: IK10 66°x11° optics adjustable through 360º using the magnet provided DALI version available on request Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content; The SPD (Surge Protection Device) protects lighting fixtures from electrical phenomena external to the system, such as power surges. In particular, this device is specifically for protection against serious events with a high energy content Operating temperature: -20°C — +45°C Glow wire test: 960° Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006 Appliance class: class I Weight: 6000 g Dimensions: Ø252x138 mm Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012 Accessories: WH0610 Honeycomb louvre, WN7100 Anti-fall kit tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption Copied

Mounting	surface mounted (ceiling, wall, floor)
Number and type of LED	4 high-intensity power LEDs, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C)
LED colour	2700K
Optics	30°
CRI Colour Rendering Index	>90
Body material	body in die-cast aluminium, trim in AISI 316L stainless steel
Screen material	screen in serigraphed, tempered, transparent extra-clear glass
Finishes	anthracite
Power supply unit	built-in power supply unit
Power cables	includes 1.5 m neoprene cable H05RN-F 3x1,0 Ø7 mm
Control system	ON/OFF
Ingress protection	IP66
Impact resistance	IK10
Features	66°x11° optics adjustable through 360º using the magnet provided
Notes	DALI version available on request
Status	Available

Close

Accessories and power supply units

Accessories (2)

Accessories for product code PS10101FMH

Honeycomb louvre

Order together with the lighting fixture.

WH0610

Honeycomb louvre

built into the lighting fixture

The honeycomb louvre can be fitted on all fixed optics except for 66°x11° optics

Various accessories

WN7100

Anti-fall kit

Power supply units (0)

Power supply units for product code PS10101FMH

No power supply units

Control gear (0)

Control gear for product code PS10101FMH

No controllers

Control input (0)

No control inputs

Stra P 1.0

Generate code

Technical data

Read more

Close

Download

Gallery

Accessories and power supply units

Accessories (2)

Honeycomb louvre

Order together with the lighting fixture.

WH0610

Honeycomb louvre

Various accessories

WN7100

Anti-fall kit

Power supply units (0)

Control gear (0)

Control input (0)

Projects

Entertainment

The Violins’ Forest by Piuarch, INTERNI HUMAN SPACES, FuoriSalone 2019

Entertainment

L&L stand - Light+Building 2018

Hospitality

La Villa Madie

Versions

Stra P 5.0

Stra