Palladiano. Light for every application. Design by Francesco Iannone - L&L Luce&Light

Palladiano 1.0

38W/55W 230Vac

Technical data

Print technical data

Optics not included

kg 6,50
IP66
IK10
DALI
PUSH
1-10V

Installation	wall mounted for outdoor applications, urban lighting, bollard for outdoor applications, ceiling mounted for outdoor applications, projector for outdoor applications
Power consumption	38W, 55W
Power supply	230Vac
Lumen output at source	3617 lm (3000K, 38W, CRI >90), 3905 lm (3000K, 38W, CRI 80), 4864 lm (3000K, 55W, CRI >90), 5256 lm (3000K, 55W, CRI 80)
Delivered lumen output	2070 lm (3000K, 45°, 38W, CRI >90), 2300 lm (3000K, 45°, 38W, CRI 80), 2850 lm (3000K, 45°, 55W, CRI >90), 3200 lm (3000K, 45°, 55W, CRI 80)
Datasheet	Palladiano 1.0 wall mounted for outdoor applications, urban lighting, bollard for outdoor applications, ceiling mounted for outdoor applications, projector for outdoor applications; Awards: German Design Award 2019, Iconic Awards 2018, Lux Awards 2018; surface mounted (ceiling, wall, floor, pole); Power consumption: 38W, 55W; Power supply: 230Vac; Lumen output at source: 3617 lm (3000K, 38W, CRI >90), 3905 lm (3000K, 38W, CRI 80), 4864 lm (3000K, 55W, CRI >90), 5256 lm (3000K, 55W, CRI 80); Delivered lumen output: 2070 lm (3000K, 45°, 38W, CRI >90), 2300 lm (3000K, 45°, 38W, CRI 80), 2850 lm (3000K, 45°, 55W, CRI >90), 3200 lm (3000K, 45°, 55W, CRI 80); 8 high-intensity power LEDs, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C); LED colour: 2700K, 3000K, 4000K; CRI Colour Rendering Index: 80, >90; Body material: body made of low-copper-content die-cast aluminium alloy EN AB 46100 for excellent resistance to corrosion; Finishes: copper finish obtained through a coat of epoxy paint followed by one of POLYESTER paint to provide corrosion resistance equal to more than 1500 hours of salt spray testing. Paints compliant with the Qualicoat standard used in the automotive sector., white finish obtained through a coat of epoxy paint followed by one of POLYESTER paint to provide corrosion resistance equal to more than 1500 hours of salt spray testing. Paints compliant with the Qualicoat standard used in the automotive sector. (RAL 9003), anthracite finish obtained through a coat of epoxy paint followed by one of POLYESTER paint to provide corrosion resistance equal to more than 1500 hours of salt spray testing. Paints compliant with the Qualicoat standard used in the automotive sector., cor-ten finish obtained through a coat of epoxy paint followed by one of POLYESTER paint to provide corrosion resistance equal to more than 1500 hours of salt spray testing. Paints compliant with the Qualicoat standard used in the automotive sector; RAL finish on request; Screen material: screen made of transparent and serigraphed polycarbonate with anti-UV treatment, high transmittance to ensure chromatic uniformity of light, and excellent resistance to knocks and scratches; built-in power supply unit; includes 5 m neoprene cable H05RN-F 2x1.00/1.00 Ø6.8 mm; Control system: Virtual midnight, ON/OFF, 1-10V, PUSH, DALI; Ingress protection: IP66; Impact resistance: IK10; version with Casambi dimming available on request; Design by: Francesco Iannone; Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content; The SPD (Surge Protection Device) protects lighting fixtures from electrical phenomena external to the system, such as power surges. In particular, this device is specifically for protection against serious events with a high energy content; Operating temperature: -20°C — +45°C; Maximum device temperature: 55°C (Ta 25°C); Glow wire test: 960°; Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006; Appliance class: class II; Weight: 6500 g; Dimensions: Ø344x346x165 mm; Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012; Accessories: WD0410E Column / spacer - h 320mm - white, WD0410H Column / spacer - h 320mm - anthracite, WD0410T Column / spacer - h 320mm - cor-ten, WD0410U Column / spacer - h 320mm - copper, WD0411E Column / spacer - h 640mm - white, WD0411H Column / spacer - h 640mm - anthracite, WD0411T Column / spacer - h 640mm - cor-ten, WD0411U Column / spacer - h 640mm - copper, WM0410E Bracket for spacer mounting / bracket for column mounting - white, WM0410H Bracket for spacer mounting / bracket for column mounting - anthracite, WM0410T Bracket for spacer mounting / bracket for column mounting - cor-ten, WM0410U Bracket for spacer mounting / bracket for column mounting - copper, WM0411E Plate for pole mounting - white, WM0411H Plate for pole mounting - anthracite, WM0411T Plate for pole mounting - cor-ten, WM0411U Plate for pole mounting - copper, WM0412E Base plate - white, WM0412H Base plate - anthracite, WM0412T Base plate - cor-ten, WM0412U Base plate - copper, WR0301 Optics - 15°, WR0302 Optics - 24°, WR0303 Optics - 38°, WR0304 Optics - 54°, WR0305 Optics - 14°x56°, WR0306 Street optics - 153°x107°, WR0307 Street optics - 85°x85°, WR0308 Street optics - 130°x130°, WR0309 Street optics - 119°x92°, WR0310 Street optics - 158°x110°, WR0311 Street optics - 149°x106°, WR0312 Street optics - 160°x112°, WR0313 Street optics - 162°x116°, WR0314 Street optics - 165°x110°, WR0315 Street optics - 145°x115°, WR0316 Street optics - 110°x80°, WR0317 Street optics - 145°x120°, WR0318 Street optics - 135°x135°, WR0319 Street optics - 47°x47°, WR0320 Street optics - 90°x90°, WR0321 Shadow-effect filter water, WR0322 Shadow-effect filter blue water, WR0323 Shadow-effect filter forest, WR0324 Shadow-effect filter green forest, WR0325 Shadow-effect filter rain, WR0326 Shadow-effect filter blue rain, WR0327 Shadow-effect filter leaves, WR0328 Shadow-effect filter green leaves, WR0329 Shadow-effect filter blurred, WR0330 Shadow-effect filter orange blurred, WR0331 Shadow-effect filter path, WR0332 Shadow-effect filter green path, WR0333 Colour filter red, WR0334 Colour filter green, WR0335 Colour filter blue; tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumptionPalladiano 1.0 wall mounted for outdoor applications, urban lighting, bollard for outdoor applications, ceiling mounted for outdoor applications, projector for outdoor applications Awards: German Design Award 2019, Iconic Awards 2018, Lux Awards 2018 surface mounted (ceiling, wall, floor, pole) Power consumption: 38W, 55W Power supply: 230Vac Lumen output at source: 3617 lm (3000K, 38W, CRI >90), 3905 lm (3000K, 38W, CRI 80), 4864 lm (3000K, 55W, CRI >90), 5256 lm (3000K, 55W, CRI 80) Delivered lumen output: 2070 lm (3000K, 45°, 38W, CRI >90), 2300 lm (3000K, 45°, 38W, CRI 80), 2850 lm (3000K, 45°, 55W, CRI >90), 3200 lm (3000K, 45°, 55W, CRI 80) 8 high-intensity power LEDs, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C) LED colour: 2700K, 3000K, 4000K CRI Colour Rendering Index: 80, >90 Body material: body made of low-copper-content die-cast aluminium alloy EN AB 46100 for excellent resistance to corrosion Finishes: copper finish obtained through a coat of epoxy paint followed by one of POLYESTER paint to provide corrosion resistance equal to more than 1500 hours of salt spray testing. Paints compliant with the Qualicoat standard used in the automotive sector., white finish obtained through a coat of epoxy paint followed by one of POLYESTER paint to provide corrosion resistance equal to more than 1500 hours of salt spray testing. Paints compliant with the Qualicoat standard used in the automotive sector. (RAL 9003), anthracite finish obtained through a coat of epoxy paint followed by one of POLYESTER paint to provide corrosion resistance equal to more than 1500 hours of salt spray testing. Paints compliant with the Qualicoat standard used in the automotive sector., cor-ten finish obtained through a coat of epoxy paint followed by one of POLYESTER paint to provide corrosion resistance equal to more than 1500 hours of salt spray testing. Paints compliant with the Qualicoat standard used in the automotive sector RAL finish on request Screen material: screen made of transparent and serigraphed polycarbonate with anti-UV treatment, high transmittance to ensure chromatic uniformity of light, and excellent resistance to knocks and scratches built-in power supply unit includes 5 m neoprene cable H05RN-F 2x1.00/1.00 Ø6.8 mm Control system: Virtual midnight, ON/OFF, 1-10V, PUSH, DALI Ingress protection: IP66 Impact resistance: IK10 version with Casambi dimming available on request Design by: Francesco Iannone Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content; The SPD (Surge Protection Device) protects lighting fixtures from electrical phenomena external to the system, such as power surges. In particular, this device is specifically for protection against serious events with a high energy content Operating temperature: -20°C — +45°C Maximum device temperature: 55°C (Ta 25°C) Glow wire test: 960° Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006 Appliance class: class II Weight: 6500 g Dimensions: Ø344x346x165 mm Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012 Accessories: WD0410E Column / spacer - h 320mm - white, WD0410H Column / spacer - h 320mm - anthracite, WD0410T Column / spacer - h 320mm - cor-ten, WD0410U Column / spacer - h 320mm - copper, WD0411E Column / spacer - h 640mm - white, WD0411H Column / spacer - h 640mm - anthracite, WD0411T Column / spacer - h 640mm - cor-ten, WD0411U Column / spacer - h 640mm - copper, WM0410E Bracket for spacer mounting / bracket for column mounting - white, WM0410H Bracket for spacer mounting / bracket for column mounting - anthracite, WM0410T Bracket for spacer mounting / bracket for column mounting - cor-ten, WM0410U Bracket for spacer mounting / bracket for column mounting - copper, WM0411E Plate for pole mounting - white, WM0411H Plate for pole mounting - anthracite, WM0411T Plate for pole mounting - cor-ten, WM0411U Plate for pole mounting - copper, WM0412E Base plate - white, WM0412H Base plate - anthracite, WM0412T Base plate - cor-ten, WM0412U Base plate - copper, WR0301 Optics - 15°, WR0302 Optics - 24°, WR0303 Optics - 38°, WR0304 Optics - 54°, WR0305 Optics - 14°x56°, WR0306 Street optics - 153°x107°, WR0307 Street optics - 85°x85°, WR0308 Street optics - 130°x130°, WR0309 Street optics - 119°x92°, WR0310 Street optics - 158°x110°, WR0311 Street optics - 149°x106°, WR0312 Street optics - 160°x112°, WR0313 Street optics - 162°x116°, WR0314 Street optics - 165°x110°, WR0315 Street optics - 145°x115°, WR0316 Street optics - 110°x80°, WR0317 Street optics - 145°x120°, WR0318 Street optics - 135°x135°, WR0319 Street optics - 47°x47°, WR0320 Street optics - 90°x90°, WR0321 Shadow-effect filter water, WR0322 Shadow-effect filter blue water, WR0323 Shadow-effect filter forest, WR0324 Shadow-effect filter green forest, WR0325 Shadow-effect filter rain, WR0326 Shadow-effect filter blue rain, WR0327 Shadow-effect filter leaves, WR0328 Shadow-effect filter green leaves, WR0329 Shadow-effect filter blurred, WR0330 Shadow-effect filter orange blurred, WR0331 Shadow-effect filter path, WR0332 Shadow-effect filter green path, WR0333 Colour filter red, WR0334 Colour filter green, WR0335 Colour filter blue tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption Copied

Mounting	surface mounted (ceiling, wall, floor, pole)
Number and type of LED	8 high-intensity power LEDs, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C)
LED colour	2700K, 3000K, 4000K
CRI Colour Rendering Index	80, >90
Body material	body in die-cast aluminium
Screen material	screen in serigraphed transparent polycarbonate
Finishes	copper, white, anthracite, cor-ten
Power supply unit	built-in power supply unit
Power cables	includes 5 m neoprene cable H05RN-F 2x1.00/1.00 Ø6.8 mm
Control system	Virtual midnight, ON/OFF, 1-10V, PUSH, DALI
Ingress protection	IP66
Impact resistance	IK10
Notes	version with Casambi dimming available on request
Design by	Francesco Iannone
Status	Available

Read more

Close

Download

See all downloads

JPG Images
PDF Catalogue
PDF Technical sheet
PDF Instruction sheet
Datasheet TXT
DXF Technical drawing
3DS File
BIM objects
LDT Photometric file
IES Photometric file
Energy label Language
- Italiano
- English
- Deutsch
- Español
- Russian
- Polski
- Nederlands
- Czech
- Slovak
- Portugues
- Français

Gallery

Accessories and power supply units

Accessories (55)

Plates

WM0412E Base plate - white	WM0412H Base plate - anthracite
WM0412T Base plate - cor-ten	WM0412U Base plate - copper

Columns

WD0410E Column / spacer - h 320mm - white	WD0410H Column / spacer - h 320mm - anthracite
WD0410T Column / spacer - h 320mm - cor-ten	WD0410U Column / spacer - h 320mm - copper
WD0411E Column / spacer - h 640mm - white	WD0411H Column / spacer - h 640mm - anthracite
WD0411T Column / spacer - h 640mm - cor-ten	WD0411U Column / spacer - h 640mm - copper

Optics

WR0301 Optics - 15°	WR0302 Optics - 24°
WR0303 Optics - 38°	WR0304 Optics - 54°
WR0305 Optics - 14°x56°	WR0306 Street optics - 153°x107°
WR0307 Street optics - 85°x85°	WR0308 Street optics - 130°x130°
WR0309 Street optics - 119°x92°	WR0310 Street optics - 158°x110°
WR0311 Street optics - 149°x106°	WR0312 Street optics - 160°x112°
WR0313 Street optics - 162°x116°	WR0314 Street optics - 165°x110°
WR0315 Street optics - 145°x115°	WR0316 Street optics - 110°x80°
WR0317 Street optics - 145°x120°	WR0318 Street optics - 135°x135°
WR0319 Street optics - 47°x47°	WR0320 Street optics - 90°x90°

Filters

WR0321 Shadow-effect filter water Order instead of optics	WR0322 Shadow-effect filter blue water Order instead of optics
WR0323 Shadow-effect filter forest Order instead of optics	WR0324 Shadow-effect filter green forest Order instead of optics
WR0325 Shadow-effect filter rain Order instead of optics	WR0326 Shadow-effect filter blue rain Order instead of optics
WR0327 Shadow-effect filter leaves Order instead of optics	WR0328 Shadow-effect filter green leaves Order instead of optics
WR0329 Shadow-effect filter blurred Order instead of optics	WR0330 Shadow-effect filter orange blurred Order instead of optics
WR0331 Shadow-effect filter path Order instead of optics	WR0332 Shadow-effect filter green path Order instead of optics
WR0333 Colour filter red Order in addition to optics 15°, 24°, 38°, 54°, 14°x56°	WR0334 Colour filter green Order in addition to optics 15°, 24°, 38°, 54°, 14°x56°
WR0335 Colour filter blue Order in addition to optics 15°, 24°, 38°, 54°, 14°x56°

Various accessories

WM0410E Bracket for spacer mounting / bracket for column mounting - white	WM0410H Bracket for spacer mounting / bracket for column mounting - anthracite
WM0410T Bracket for spacer mounting / bracket for column mounting - cor-ten	WM0410U Bracket for spacer mounting / bracket for column mounting - copper
WM0411E Plate for pole mounting - white	WM0411H Plate for pole mounting - anthracite
WM0411T Plate for pole mounting - cor-ten	WM0411U Plate for pole mounting - copper

Power supply units (0)

No power supply units

Control gear (0)

No controllers

Control input (0)

No control inputs

Projects

Entertainment
L&L stand - Light+Building 2018
Frankfurt am Main, Germany

Versions

Palladiano 1.1
76W, 110W

230Vac

2700K, 3000K, 4000K