Plin 2.2 Bollards for lighting paths, walkways and gardens - L&L Luce&Light

Plin 2.2

Bollards for outdoor applications

bollard for outdoor applications - 12W 230Vac - single beam - diffuse, asymmetrical optics - h 760 mm

Generate code

Technical data

Print technical data

kg 1,95
IP65
IK08

Installation	bollard for outdoor applications, single beam
Power consumption	12W
Power supply	230Vac
Lumen output at source	1242 lm (3000K)
Delivered lumen output	492 lm (3000K)
Datasheet	Plin 2.2 bollard for outdoor applications, single beam; Awards: German Design Award 2019; surface mounted (floor); Power consumption: 12W; Power supply: 230Vac; Lumen output at source: 1242 lm (3000K); Delivered lumen output: 492 lm (3000K); 18 mid power LEDs, 3-step MacAdam, 50 000h L85 B10 (Ta 25°C); LED colour: 2700K, 3000K, 4000K; Optics: diffuse, asymmetrical: optical system consisting of serigraphed, tempered, transparent extra-clear glass, combined with a technical filter in PMMA, housed inside the tilted head and illuminating the front and rear areas; Upward flux fraction: 0,40%; CRI Colour Rendering Index: 80; Body material: head made of ANTICORODAL 6082 aluminium alloy, produced entirely on a CNC lathe. Body in aluminium alloy 6060, produced with die-casting; Finishes: grey finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9006), anthracite finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, white finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003), cor-ten finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector; RAL finish on request; Screen material: screen in serigraphed, tempered, transparent extra-clear glass; built-in power supply unit; Ingress protection: IP65; Impact resistance: IK08; non-standard heights available on request; Operating temperature: -20°C — +45°C; Glow wire test: 960°; Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006; Appliance class: class I; Weight: 1950 g; Dimensions: 124x67x760 mm; Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012; tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumptionPlin 2.2 bollard for outdoor applications, single beam Awards: German Design Award 2019 surface mounted (floor) Power consumption: 12W Power supply: 230Vac Lumen output at source: 1242 lm (3000K) Delivered lumen output: 492 lm (3000K) 18 mid power LEDs, 3-step MacAdam, 50 000h L85 B10 (Ta 25°C) LED colour: 2700K, 3000K, 4000K Optics: diffuse, asymmetrical: optical system consisting of serigraphed, tempered, transparent extra-clear glass, combined with a technical filter in PMMA, housed inside the tilted head and illuminating the front and rear areas Upward flux fraction: 0,40% CRI Colour Rendering Index: 80 Body material: head made of ANTICORODAL 6082 aluminium alloy, produced entirely on a CNC lathe. Body in aluminium alloy 6060, produced with die-casting Finishes: grey finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9006), anthracite finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, white finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003), cor-ten finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector RAL finish on request Screen material: screen in serigraphed, tempered, transparent extra-clear glass built-in power supply unit Ingress protection: IP65 Impact resistance: IK08 non-standard heights available on request Operating temperature: -20°C — +45°C Glow wire test: 960° Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006 Appliance class: class I Weight: 1950 g Dimensions: 124x67x760 mm Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012 tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption Copied

Mounting	surface mounted (floor)
Number and type of LED	18 mid power LEDs, 3-step MacAdam, 50 000h L85 B10 (Ta 25°C)
LED colour	2700K, 3000K, 4000K
Optics	diffuse, asymmetrical
CRI Colour Rendering Index	80
Body material	head and column in aluminium
Screen material	screen in serigraphed, tempered, transparent extra-clear glass
Finishes	grey, anthracite, white, cor-ten
Power supply unit	built-in power supply unit
Ingress protection	IP65
Impact resistance	IK08
Notes	non-standard heights available on request
Status	Available

Read more

Close

Download

See all downloads

Gallery

Accessories and power supply units

Accessories (0)

No accessories

Power supply units (0)

No power supply units

Control gear (0)

No controllers

Control input (0)

No control inputs

Projects

Corporate
thecamp
Aix-en-Provence, France

Versions