Neva 1.1 Linear profiles for architectural light on walls and facades

Technical data

Updated to NV11005WA

kg 1,64
IP65
IP67
IK06

Installation	linear profile for outdoor applications
Power consumption	27W
Power supply	24Vdc
Lumen output at source	2087 lm (3000K, 27W)
Delivered lumen output	1715 lm (3000K, 30°, 27W)
Datasheet	Neva 1.1 code: NV11005WA linear profile for outdoor applications; walkover; surface mounted (ceiling, wall, floor) with brackets or recessed (ceiling, floor, wall) with outer casing; Power consumption: 27W; Power supply: 24Vdc; Lumen output at source: 2087 lm (3000K, 27W); Delivered lumen output: 1715 lm (3000K, 30°, 27W); 15 power LEDs, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C); LED colour: 3000K; Optics: 10°x40°: optical system composed of a series of equidistant light sources, 60 mm apart. The deep-set TIR lens guarantees high-quality light emission and visual comfort; CRI Colour Rendering Index: 80; Body material: body made of ANTICORODAL 6060 low-copper-content aluminium alloy, made from an extruded profile, then anodized grey (20 micron) to give the product better heat dissipation and increase its resistance to corrosion. Caps made of glass-fibre-reinforced polyamide for greater resistance.; Screen material: 4-mm-thick tempered, transparent extra-clear glass, with vitrified serigraphy, to ensure chromatic uniformity of light and excellent resistance to knocks and scratches.; power supply unit not included; includes 1.5 m neoprene cable H05RN-F 2x0.75 Ø6.3 mm; Ingress protection: IP65, IP67; Impact resistance: IK06; Casambi control using the Casambi app with dedicated electronics; Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content; This is an NTC thermistor mounted on the LED board to protect the lighting fixture against overheating. Should the product function at an operating temperature greater than the maximum temperature at which it can operate correctly, the protection is activated and gradually reduces the power. The NTC causes the integrated electronic parts to cool down to avoid the lighting fixture instantly switching itself off. When the operating temperature is again within normal range, the NTC automatically restores the lighting fixture’s original operating conditions; Operating temperature: -20°C — +45°C; Maximum device temperature: 45°C (Ta 25°C); Glow wire test: 960°; Photobiological safety: in accordance with IEC TR 62778:2014; Appliance class: class III; Weight: 1640 g; Dimensions: 916x37x29mm; Energy efficiency class: F (light source) in accordance with EU 2019/2015; Accessories: WB6511 Anti-glare shield in black-painted stainless steel - 912 mm, WC6511 Aluminium outer casing - 922 mm, WC6711 Aluminium outer casing for plasterboard - 922 mm, WH6011 Honeycomb louvre , WM0601 Pair of brackets h 75 mm, WM0602 Pair of brackets h 140 mm, WN6001 Anti-fall kit, WN6002 U-shaped brackets pair, WN6003 Springs pair, WN6005 Alignment kit for outer casing, WN6006 Pair of extractors for outer casings; tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumptionNeva 1.1 code: NV11005WA linear profile for outdoor applications walkover surface mounted (ceiling, wall, floor) with brackets or recessed (ceiling, floor, wall) with outer casing Power consumption: 27W Power supply: 24Vdc Lumen output at source: 2087 lm (3000K, 27W) Delivered lumen output: 1715 lm (3000K, 30°, 27W) 15 power LEDs, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C) LED colour: 3000K Optics: 10°x40°: optical system composed of a series of equidistant light sources, 60 mm apart. The deep-set TIR lens guarantees high-quality light emission and visual comfort CRI Colour Rendering Index: 80 Body material: body made of ANTICORODAL 6060 low-copper-content aluminium alloy, made from an extruded profile, then anodized grey (20 micron) to give the product better heat dissipation and increase its resistance to corrosion. Caps made of glass-fibre-reinforced polyamide for greater resistance. Screen material: 4-mm-thick tempered, transparent extra-clear glass, with vitrified serigraphy, to ensure chromatic uniformity of light and excellent resistance to knocks and scratches. power supply unit not included includes 1.5 m neoprene cable H05RN-F 2x0.75 Ø6.3 mm Ingress protection: IP65, IP67 Impact resistance: IK06 Casambi control using the Casambi app with dedicated electronics Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content; This is an NTC thermistor mounted on the LED board to protect the lighting fixture against overheating. Should the product function at an operating temperature greater than the maximum temperature at which it can operate correctly, the protection is activated and gradually reduces the power. The NTC causes the integrated electronic parts to cool down to avoid the lighting fixture instantly switching itself off. When the operating temperature is again within normal range, the NTC automatically restores the lighting fixture’s original operating conditions Operating temperature: -20°C — +45°C Maximum device temperature: 45°C (Ta 25°C) Glow wire test: 960° Photobiological safety: in accordance with IEC TR 62778:2014 Appliance class: class III Weight: 1640 g Dimensions: 916x37x29mm Energy efficiency class: F (light source) in accordance with EU 2019/2015 Accessories: WB6511 Anti-glare shield in black-painted stainless steel - 912 mm, WC6511 Aluminium outer casing - 922 mm, WC6711 Aluminium outer casing for plasterboard - 922 mm, WH6011 Honeycomb louvre , WM0601 Pair of brackets h 75 mm, WM0602 Pair of brackets h 140 mm, WN6001 Anti-fall kit, WN6002 U-shaped brackets pair, WN6003 Springs pair, WN6005 Alignment kit for outer casing, WN6006 Pair of extractors for outer casings tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption Copied

Mounting	surface mounted (ceiling, wall, floor) with brackets or recessed (ceiling, floor, wall) with outer casing
Number and type of LED	15 power LEDs, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C)
LED colour	3000K
Optics	10°x40°
CRI Colour Rendering Index	80
Body material	body in anodized anticorodal aluminium
Screen material	screen in serigraphed, transparent, tempered extra-clear glass
Power supply unit	power supply unit not included
Power cables	includes 1.5 m neoprene cable H05RN-F 2x0.75 Ø6.3 mm
Ingress protection	IP65, IP67
Impact resistance	IK06
Status	Available

Close

Customize this product

This product can be customized, thanks to our flexible in-house production. We suggest some of the possible customized versions on the right, but if you have any different requirements, we can review them together.

Possible customizations:

2200K, 3500K or non-white LED colour

Input

230Vac 50-60 Hz

Output

24Vdc; 60W

Power

60W

Dimmering

ON/OFF

Power supply unit IP

IP20

Input

230Vac 50-60 Hz

Output

24Vdc; 120W

Power

120W

Dimmering

ON/OFF

Power supply unit IP

IP20

Input

230Vac 50-60 Hz

Output

24Vdc; 180W

Power

180W

Dimmering

ON/OFF

Power supply unit IP

IP20

Input

115-230Vac 50-60 Hz
230Vac 50-60 Hz

Output

24Vdc; 40W

Dimmering

ON/OFF

Power supply unit IP

IP67

Input

230Vac 50-60 Hz

Output

24Vdc; 60W

Dimmering

ON/OFF

Power supply unit IP

IP20

Input

115-230Vac 50-60 Hz
230Vac 50-60 Hz

Output

24Vdc; 60W

Dimmering

ON/OFF

Power supply unit IP

IP67

Input

230Vac 50-60 Hz

Output

24Vdc; 100W

Dimmering

ON/OFF

Power supply unit IP

IP20

Input

230Vac 50-60 Hz

Output

24Vdc; 150W

Power

150W

Dimmering

ON/OFF

Power supply unit IP

IP20

Input

115-230Vac 50-60 Hz
230Vac 50-60 Hz

Output

24Vdc; 150W

Dimmering

ON/OFF

Power supply unit IP

IP67

Input

115-230Vac 50-60 Hz
230Vac 50-60 Hz

Output

24Vdc; 240W

Dimmering

ON/OFF

Power supply unit IP

IP67

Input

115-230Vac 50-60 Hz
230Vac 50-60 Hz

Output

24Vdc; 320W

Dimmering

ON/OFF

Power supply unit IP

IP67

Input

12-24-48Vdc

Output

With 24 Vdc input:; 24Vdc; 288W
With 12 Vdc input:; 12Vdc; 144W

With 48 Vdc input:; 48Vdc; 576W

Dimmering

0/1-10V, PUSH, DALI, 10kΩ potentiometer

Power supply unit IP

IP20

Input

12-24-48Vdc

Output

1 channel

With 24 Vdc input:; 24Vdc; 120W
With 12 Vdc input:; 12Vdc; 60W

With 48 Vdc input:; 48Vdc; 240W

2 channels

With 12 Vdc input:; 12Vdc; 120W

With 24 Vdc input:; 24Vdc; 240W

With 48 Vdc input:; 48Vdc; 480W

3 channels

With 12 Vdc input:; 12Vdc; 180W

With 24 Vdc input:; 24Vdc; 360W

With 48 Vdc input:; 48Vdc; 720W

4 channels

With 12 Vdc input:; 12Vdc; 192W

With 24 Vdc input:; 24Vdc; 384W

With 48 Vdc input:; 48Vdc; 768W

Dimmering

0/1-10V, PUSH, DALI, ON/OFF, 10kΩ potentiometer, DMX512+RDM, Stand alone

Power supply unit IP

IP20

Input

12-24Vdc
24Vdc

Output

1 channel

With 24 Vdc input:; 24Vdc; 120W
With 12 Vdc input:; 12Vdc; 60W

2 channels

With 12 Vdc input:; 12Vdc; 120W

With 24 Vdc input:; 24Vdc; 240W

3 channels

With 12 Vdc input:; 12Vdc; 120W

With 24 Vdc input:; 24Vdc; 240W

4 channels

With 12 Vdc input:; 12Vdc; 120W

With 24 Vdc input:; 24Vdc; 240W

Dimmering

PUSH, Casambi

Power supply unit IP

IP20

Input

12-24Vdc
24Vdc

Output

With 24 Vdc input:; 24Vdc; 240W
With 12 Vdc input:; 12Vdc; 120W

Dimmering

PUSH, Casambi

Power supply unit IP

IP20

Input

220─240Vac 50─60Hz

Output

max 350mA 58Vdc max

Ingress protection

IP20

Dimensions

35x47x166 mm, 185 g

Cutout dimensions

Ø58 mm

Input

12-48 Vdc

Ingress protection

IP20

Dimensions

45x58x25 mm, 40g

WM0601 Pair of brackets h 75 mm	WM0602 Pair of brackets h 140 mm
WN6001 Anti-fall kit	WN6005 Alignment kit for outer casing

WN6002 U-shaped brackets pair	WN6003 Springs pair
WN6006 Pair of extractors for outer casings

Neva 1.1

Generate code

Technical data

Read more

Close

Customize this product

Possible customizations:

Download

Gallery

Accessories and power supply units

Accessories (11)

Outer casings

WC6511

Aluminium outer casing - 922 mm

WC6711

Aluminium outer casing for plasterboard - 922 mm

Honeycomb louvre

Order together with the lighting fixture.

WH6011

Honeycomb louvre

Anti-glare shield

WB6511

Anti-glare shield in black-painted stainless steel - 912 mm

Various accessories

WM0601

Pair of brackets h 75 mm

WM0602

Pair of brackets h 140 mm

WN6001

Anti-fall kit

WN6005

Alignment kit for outer casing

Spare parts

WN6002

U-shaped brackets pair

WN6003

Springs pair

WN6006

Pair of extractors for outer casings

Power supply units (11)

AV00002406020

ON/OFF constant-voltage PSU

AV00002412020

ON/OFF constant-voltage PSU

AV00002418020

ON/OFF constant-voltage PSU

AV24040IP67

ON/OFF constant-voltage PSU

AV24060IP20

ON/OFF constant-voltage PSU

AV24060IP67

ON/OFF constant-voltage PSU

AV24100IP20

ON/OFF constant-voltage PSU

AV24150IP20

ON/OFF constant-voltage PSU

AV24150IP67

ON/OFF constant-voltage PSU

AV24240IP67

ON/OFF constant-voltage PSU

AV24320IP67

ON/OFF constant-voltage PSU

Control gear (4)

ADV576DALIN1

Low-voltage dimmer

ARVUNID2-01

Universal sequencer - Low-voltage 4-channel controller with constant-voltage output

1 channel

2 channels

3 channels

4 channels

EC0CEN12445A20

Low-voltage 4-channel controller with constant-voltage output for CASAMBI

1 channel

2 channels

3 channels

4 channels

EC0CEN1244DA20

Low-voltage dimmer for CASAMBI

Control input (2)