Tago 6.3. Outdoor linear profiles, architectural lighting for facades - L&L Luce&Light

Search

Tago 6.3

Linear profiles for outdoor applications

linear profile for outdoor applications - 55W 230Vac 49W 48Vdc - 1036 mm - RGBW - DMX512+RDM

Generate code

Technical data

Print technical data

230Vac
48Vdc
kg 5,6 230Vac - kg 5,4 48Vdc
IP65
IP67
IP69
IK09
DMX+RDM

Installation	linear profile for outdoor applications
Power consumption	55W, 49W
Power supply	230Vac, 48Vdc
Lumen output at source	8280 lm, R: 576 lm G: 3792 lm B: 912 lm W: 3000 lm (4000K)
Delivered lumen output	5496 lm, R: 360 lm G: 2640 lm B: 528 lm W: 1968 lm (4000K, 24°)
Datasheet	Tago 6.3 linear profile for outdoor applications; surface mounted (ceiling, wall, floor); Power consumption: 55W, 49W; Power supply: 230Vac, 48Vdc; Lumen output at source: 8280 lm, R: 576 lm G: 3792 lm B: 912 lm W: 3000 lm (4000K); Delivered lumen output: 5496 lm, R: 360 lm G: 2640 lm B: 528 lm W: 1968 lm (4000K, 24°); 96 high power LEDs, 60 000h L80 B10 (Ta 25°C); LED colour: RGBW; Optics: 24°, 30°, 52°: optical system composed of a series of equidistant light sources, 41.7 mm apart. The TIR lens, made of PMMA, guarantees high-quality light emission and visual comfort; Body material: body made of Anticorodal® low-copper-content aluminium EN AW 6060 T5 for excellent heat dissipation, manufactured from an extruded profile and painted black (RAL 9005 matt) for excellent corrosion resistance. Caps made of black-painted (RAL 9005 matt) low-copper-content die-cast aluminium EN AB 47100. Finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide greater resistance to corrosion and atmospheric agents. AISI 304 stainless steel bracket painted matt RAL 9005 black with epoxy paint. Bushings in AISI 316L stainless steel, made with a CNC lathe. GORE-TEX valve to relieve the internal pressure; Finishes: black finish (RAL 9005 matt) obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1000 hours of salt spray (RAL 9005); RAL finish on request; Screen material: 4-mm-thick transparent, tempered extra-clear glass, high-transmittance with grey-vitrified serigraphy (RAL 7015), to ensure chromatic uniformity and excellent resistance to knocks and scratches; Seals: black Santoprene™ O-rings guarantee lasting resistance to UV rays; Installation: DMX+RDM version: IP68 H-style three-port, four-pole connector for the power supply, and IP68 three-pin female connector and IP68 three-pin male connector for the DMX+RDM signal; built-in power supply unit, power supply unit not included; 230Vac: includes 1.5 m neoprene cable H07RN-F 3x1.0 Ø9.3 mm and 2 cables for DMX signal with shielded cable of 0.75 m Ø5.5 mm 48Vdc: includes 1.5 m neoprene cable H07RN-F 2x1.0 Ø8.7 mm and 2 cables for DMX signal with shielded cable of 0.75 m Ø5.5 mm; Control system: DMX512+RDM; Ingress protection: IP65, IP67, IP69; Impact resistance: IK09; brackets with two pivot points for accurate adjustment; Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; Operating temperature: -20°C — +45°C; Maximum device temperature: 40°C (Ta 25°C); Photobiological safety: in accordance with IEC TR 62778:2014; Appliance class: class I (230Vac), class III (48Vdc); Weight: 230Vac: 5600 g, 48Vdc: 5400 g; Dimensions: 74x149x1036 mm; Energy efficiency class: F (light source) in accordance with EU 2019/2015; Accessories: WFA02 IP68 “h”-type three-way connector (82x53.3x28 mm), WFA03 3-pin female connector, WFA04 3-pin male connector, WMA03N Pair of adjustable brackets; tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumptionTago 6.3 linear profile for outdoor applications surface mounted (ceiling, wall, floor) Power consumption: 55W, 49W Power supply: 230Vac, 48Vdc Lumen output at source: 8280 lm, R: 576 lm G: 3792 lm B: 912 lm W: 3000 lm (4000K) Delivered lumen output: 5496 lm, R: 360 lm G: 2640 lm B: 528 lm W: 1968 lm (4000K, 24°) 96 high power LEDs, 60 000h L80 B10 (Ta 25°C) LED colour: RGBW Optics: 24°, 30°, 52°: optical system composed of a series of equidistant light sources, 41.7 mm apart. The TIR lens, made of PMMA, guarantees high-quality light emission and visual comfort Body material: body made of Anticorodal® low-copper-content aluminium EN AW 6060 T5 for excellent heat dissipation, manufactured from an extruded profile and painted black (RAL 9005 matt) for excellent corrosion resistance. Caps made of black-painted (RAL 9005 matt) low-copper-content die-cast aluminium EN AB 47100. Finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide greater resistance to corrosion and atmospheric agents. AISI 304 stainless steel bracket painted matt RAL 9005 black with epoxy paint. Bushings in AISI 316L stainless steel, made with a CNC lathe. GORE-TEX valve to relieve the internal pressure Finishes: black finish (RAL 9005 matt) obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1000 hours of salt spray (RAL 9005) RAL finish on request Screen material: 4-mm-thick transparent, tempered extra-clear glass, high-transmittance with grey-vitrified serigraphy (RAL 7015), to ensure chromatic uniformity and excellent resistance to knocks and scratches Seals: black Santoprene™ O-rings guarantee lasting resistance to UV rays Installation: DMX+RDM version: IP68 H-style three-port, four-pole connector for the power supply, and IP68 three-pin female connector and IP68 three-pin male connector for the DMX+RDM signal built-in power supply unit, power supply unit not included 230Vac: includes 1.5 m neoprene cable H07RN-F 3x1.0 Ø9.3 mm and 2 cables for DMX signal with shielded cable of 0.75 m Ø5.5 mm 48Vdc: includes 1.5 m neoprene cable H07RN-F 2x1.0 Ø8.7 mm and 2 cables for DMX signal with shielded cable of 0.75 m Ø5.5 mm Control system: DMX512+RDM Ingress protection: IP65, IP67, IP69 Impact resistance: IK09 brackets with two pivot points for accurate adjustment Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit Operating temperature: -20°C — +45°C Maximum device temperature: 40°C (Ta 25°C) Photobiological safety: in accordance with IEC TR 62778:2014 Appliance class: class I (230Vac), class III (48Vdc) Weight: 230Vac: 5600 g, 48Vdc: 5400 g Dimensions: 74x149x1036 mm Energy efficiency class: F (light source) in accordance with EU 2019/2015 Accessories: WFA02 IP68 “h”-type three-way connector (82x53.3x28 mm), WFA03 3-pin female connector, WFA04 3-pin male connector, WMA03N Pair of adjustable brackets tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption Copied

Mounting	surface mounted (ceiling, wall, floor)
Number and type of LED	96 high power LEDs, 60 000h L80 B10 (Ta 25°C)
LED colour	RGBW
Optics	24°, 30°, 52°
Body material	body in anticorodal aluminium, bracket in stainless steel, caps made of die-cast aluminium
Screen material	screen in serigraphed-grey and transparent, tempered extra-clear glass
Finishes	black
Power supply unit	built-in power supply unit, power supply unit not included
Power cables	230Vac: includes 1.5 m neoprene cable H07RN-F 3x1.0 Ø9.3 mm and 2 cables for DMX signal with shielded cable of 0.75 m Ø5.5 mm 48Vdc: includes 1.5 m neoprene cable H07RN-F 2x1.0 Ø8.7 mm and 2 cables for DMX signal with shielded cable of 0.75 m Ø5.5 mm
Control system	DMX512+RDM
Ingress protection	IP65, IP67, IP69
Impact resistance	IK09
Features	brackets with two pivot points for accurate adjustment
Status	Available

Read more

Close

Download

See all downloads

Gallery

Accessories and power supply units

Accessories (4)

Various accessories

WMA03N

Pair of adjustable brackets

optional

Wiring materials

WFA02 IP68 “h”-type three-way connector (82x53.3x28 mm) 4-pin	WFA03 3-pin female connector for in/out connection IP66-IP68
WFA04 3-pin male connector for IP66-IP68 in/out connection

Power supply units (4)

AV48060IP67

ON/OFF constant-voltage PSU

Input	115-230Vac 50-60 Hz 230Vac 50-60 Hz
Output	48Vdc; 60W
Dimmering	ON/OFF
Power supply unit IP	IP67

AV48150IP20

ON/OFF constant-voltage PSU

Input	230Vac 50-60 Hz
Output	48Vdc; 150W
Power	150W
Dimmering	ON/OFF
Power supply unit IP	IP20

AV48150IP67

ON/OFF constant-voltage PSU

Input	115-230Vac 50-60 Hz 230Vac 50-60 Hz
Output	48Vdc; 150W
Dimmering	ON/OFF
Power supply unit IP	IP67

AV48240IP67

ON/OFF constant-voltage PSU

Input	115-230Vac 50-60 Hz 230Vac 50-60 Hz
Output	48Vdc; 240W
Dimmering	ON/OFF
Power supply unit IP	IP67

Control gear (0)

No controllers

Control input (7)

ECPNL2301DM20

Touch-screen device

Required outer casing not included

Input	115-230 Vac 50-60Hz
Output	DMX512 bus, WiFi, RF
Ingress protection	IP20
Dimensions	178x33x48 mm 230 g
Control	touch RGBW

TLC15

1-channel remote control for TLR07

Input	CR2450 battery
Output	433.92 MHz
Ingress protection	IP20
Dimensions	40x40x10 mm
Range	100 m (40m indoors)

TLC16

2-channel remote control for TLR07

Input	CR2450 battery
Output	433.92 MHz
Ingress protection	IP20
Dimensions	40x40x10 mm
Range	100 m (40 m indoors)

TLC17

4-channel remote control for TLR07

Input	CR2450 battery
Output	433.92 MHz
Ingress protection	IP20
Dimensions	40x40x10 mm
Range	100 m (40 m indoors)

TLR07

2-channel receiver for TLC15, TLC16, TLC17 remote control

(1/2 NO push buttons)

Input	110-230Vac 50/60Hz
Output	2 clean contacts
Ingress protection	IP20
Dimensions	58x43x21 mm
Cutout dimensions	Ø50 mm

TOUCH02L1

Single-zone touch-screen device

Required outer casing not included WC0302

Input	100—240Vac
Output	DMX512 bus, WiFi, RF
Ingress protection	IP20
Dimensions	86x86x36 mm 225 g
Control	Touch RGBW

TOUCH03L1

4-zone touch-screen device with memory

Required outer casing not included WC0302

Input	100—240Vac
Output	DMX512 bus, WiFi, RF
Ingress protection	IP20
Dimensions	86x86x36 mm 225 g
Control	touch RGBW

Versions