Intono. Smart-speaker-compatible outdoor wall fixtures with speaker - L&L Luce&Light

Intono 3.9

wall mounted for outdoor applications - 9W 24Vdc - single-beam version with built-in speaker - 121x80x240 mm

Technical data

Print technical data

kg 2,24
IP65
IK04

Installation	wall mounted for outdoor applications, single beam
Power consumption	9W
Power supply	24Vdc
Lumen output at source	822 lm (3000K, CRI >90), 988 lm (3000K, CRI 80)
Delivered lumen output	696 lm (3000K, 15°, CRI >90), 837 lm (3000K, 15°, CRI 80)
Datasheet	Intono 3.9 wall mounted for outdoor applications, single beam; Awards: German Design Award 2021, IDA International Design Awards 2019 - Gold, LIT Lighting Design Awards 2019, Red Dot Award 2020; surface mounted (wall); Power consumption: 9W; Power supply: 24Vdc; Lumen output at source: 822 lm (3000K, CRI >90), 988 lm (3000K, CRI 80); Delivered lumen output: 696 lm (3000K, 15°, CRI >90), 837 lm (3000K, 15°, CRI 80); 1 high power density COB LED, 2-step MacAdam, 50 000h L95 B10 (Ta 25°C); LED colour: 2700K, 3000K, 4000K; Optics: asymmetrical 11°: optical system consisting of a high-efficiency spherical lens with an asymmetrical holder in black anti-glare technopolymer, 15°, 20°, 43°: optical system consisting of a high-efficiency metallized technopolymer reflector, asymmetrical: optical system consisting of an asymmetrical technopolymer lens, wall grazing: optical system consisting of a high-efficiency metallized technopolymer reflector combined with a satin screen and a technical filter. An anti-glare black technopolymer holder completes the optical system; CRI Colour Rendering Index: 80, >90; Body material: body made of low-copper-content die-cast aluminium alloy EN AB 46100 for excellent resistance to corrosion; Finishes: white finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003), grey finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9006), finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of primer, which enables the fixture to be painted with paints such as two-pack polyurethane varnishes and two-pack acrylic paints suitable for masonry surfaces, anthracite finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, cor-ten finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector; RAL finish on request; Screen material: 4-mm-thick transparent extra-clear glass, with high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches, with a RAL 9005 black serigraphed border; Installation: the device must be installed with the speaker facing down; power supply unit not included; Ingress protection: IP65; Impact resistance: IK04; single-beam version with built-in speaker. Speaker: maximum power 3W, nominal impedance Z 16 Ohm, mean sound pressure level 86 dB (1W/1m); version compatible with Google Home or Amazon Echo available on request for voice command control; Operating temperature: -20°C — +45°C; Glow wire test: 960°; Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006; Appliance class: class III; Weight: 2240 g; Dimensions: 121x80x240 mm; Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012; Accessories: honeycomb louvre, WUNT39A00 Bluetooth 3.0 audio control kit with power supply unit and amplifier, WUNT39A01 Wi-Fi light control kit; tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumptionIntono 3.9 wall mounted for outdoor applications, single beam Awards: German Design Award 2021, IDA International Design Awards 2019 - Gold, LIT Lighting Design Awards 2019, Red Dot Award 2020 surface mounted (wall) Power consumption: 9W Power supply: 24Vdc Lumen output at source: 822 lm (3000K, CRI >90), 988 lm (3000K, CRI 80) Delivered lumen output: 696 lm (3000K, 15°, CRI >90), 837 lm (3000K, 15°, CRI 80) 1 high power density COB LED, 2-step MacAdam, 50 000h L95 B10 (Ta 25°C) LED colour: 2700K, 3000K, 4000K Optics: asymmetrical 11°: optical system consisting of a high-efficiency spherical lens with an asymmetrical holder in black anti-glare technopolymer, 15°, 20°, 43°: optical system consisting of a high-efficiency metallized technopolymer reflector, asymmetrical: optical system consisting of an asymmetrical technopolymer lens, wall grazing: optical system consisting of a high-efficiency metallized technopolymer reflector combined with a satin screen and a technical filter. An anti-glare black technopolymer holder completes the optical system CRI Colour Rendering Index: 80, >90 Body material: body made of low-copper-content die-cast aluminium alloy EN AB 46100 for excellent resistance to corrosion Finishes: white finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003), grey finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9006), finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of primer, which enables the fixture to be painted with paints such as two-pack polyurethane varnishes and two-pack acrylic paints suitable for masonry surfaces, anthracite finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, cor-ten finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector RAL finish on request Screen material: 4-mm-thick transparent extra-clear glass, with high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches, with a RAL 9005 black serigraphed border Installation: the device must be installed with the speaker facing down power supply unit not included Ingress protection: IP65 Impact resistance: IK04 single-beam version with built-in speaker. Speaker: maximum power 3W, nominal impedance Z 16 Ohm, mean sound pressure level 86 dB (1W/1m) version compatible with Google Home or Amazon Echo available on request for voice command control Operating temperature: -20°C — +45°C Glow wire test: 960° Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006 Appliance class: class III Weight: 2240 g Dimensions: 121x80x240 mm Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012 Accessories: honeycomb louvre, WUNT39A00 Bluetooth 3.0 audio control kit with power supply unit and amplifier, WUNT39A01 Wi-Fi light control kit tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption Copied

Mounting	surface mounted (wall)
Number and type of LED	1 high power density COB LED, 2-step MacAdam, 50 000h L95 B10 (Ta 25°C)
LED colour	2700K, 3000K, 4000K
Optics	asymmetrical 11°, 15°, 20°, 43°, asymmetrical, wall grazing
CRI Colour Rendering Index	80, >90
Body material	body in die-cast aluminium
Screen material	screen in black-serigraphed, tempered, transparent extra-clear glass
Finishes	white, grey, primer, anthracite, cor-ten
Power supply unit	power supply unit not included
Ingress protection	IP65
Impact resistance	IK04
Features	single-beam version with built-in speaker. Speaker: maximum power 3W, nominal impedance Z 16 Ohm, mean sound pressure level 86 dB (1W/1m)
Notes	version compatible with Google Home or Amazon Echo available on request for voice command control
Status	Available

Read more

Close

Download

See all downloads

JPG Images
PDF Catalogue
PDF Technical sheet
PDF Instruction sheet
Datasheet TXT
DXF Technical drawing
3DS File
BIM objects
LDT Photometric file
IES Photometric file
Energy label Language
- Italiano
- English
- Deutsch
- Español
- Russian
- Polski
- Nederlands
- Czech
- Slovak
- Portugues
- Français

Gallery

Accessories and power supply units

Accessories (3)

Honeycomb louvre

Add the optical accessory in the code generator

honeycomb louvre

built into the lighting fixture

The honeycomb louvre can be fitted on all optics except for the asymmetrical, asymmetrical 11° and wall grazing optics

Various accessories

WUNT39A00

Bluetooth 3.0 audio control kit with power supply unit and amplifier

for Alexa and Google voice-control systems

WUNT39A01

Wi-Fi light control kit

Power supply units (15)

ACUNI020T1

ON/OFF constant-current PSU

Input	230Vac 50-60 Hz
Output	24Vdc 16W 250mA 13W 350mA 19W 400mA 20W 450mA 20W 500mA 20W 550mA 20W 600mA 20W 700mA 20W
Dimmering	Cannot be dimmed
Power supply unit IP	IP20

ACUNI032T1

ON/OFF constant-current PSU

Input	230Vac 50-60 Hz
Output	24Vdc 20W 12Vdc 10W 28Vdc 22W 350mA 17W 500mA 24W 550mA 25W 700mA 32W
Dimmering	Cannot be dimmed
Power supply unit IP	IP20

AD020DALIT1

DALI dimmable power supply unit

Output	24Vdc 16W 250mA 10W 350mA 15W 400mA 17W 450mA 19W 500mA 20W 550mA 20W 600mA 20W 700mA 20W
Dimmering	DALI, ON/OFF
Power supply unit IP	IP20

AD032TLT1

dimmable power supply unit

Input	230Vac 50-60 Hz
Output	24Vdc 20W 12Vdc 10W 28Vdc 22W 350mA 17W 500mA 24W 550mA 25W 700mA 32W 750mA 32W
Dimmering	PUSH, Mains dimming, ON/OFF
Power supply unit IP	IP20

ADUNITC

1-10V+PUSH dimmable power supply unit

Input	115-230Vac 50-60 Hz 230Vac 50-60 Hz
Output	24Vdc 20W 12Vdc 11W 250mA 13W 300mA 16W 350mA 18W 400mA 21W 450mA 23W 500mA 25W 550mA 27W 600mA 30W 650mA 32W 700mA 32W 750mA 20W 800mA 20W 850mA 20W 900mA 20W
Dimmering	1-10V, PUSH, ON/OFF
Power supply unit IP	IP20

AV24010IP20

ON/OFF constant-voltage PSU

Input	115-230Vac 50-60 Hz 230Vac 50-60 Hz
Output	24Vdc 10W
Dimmering	ON/OFF
Power supply unit IP	IP20

AV24020IP67

ON/OFF constant-voltage PSU

Input	115-230Vac 50-60 Hz 230Vac 50-60 Hz
Output	24Vdc 20W
Dimmering	ON/OFF
Power supply unit IP	IP67

AV24040IP67

ON/OFF constant-voltage PSU

Input	115-230Vac 50-60 Hz 230Vac 50-60 Hz
Output	24Vdc 40W
Dimmering	ON/OFF
Power supply unit IP	IP67

AV24060IP20

ON/OFF constant-voltage PSU

Input	230Vac 50-60 Hz
Output	24Vdc 60W
Dimmering	ON/OFF
Power supply unit IP	IP20

AV24060IP67

ON/OFF constant-voltage PSU

Input	115-230Vac 50-60 Hz 230Vac 50-60 Hz
Output	24Vdc 60W
Dimmering	Cannot be dimmed
Power supply unit IP	IP67

AV24100IP20

ON/OFF constant-voltage PSU

Input	230Vac 50-60 Hz
Output	24Vdc 100W
Dimmering	ON/OFF
Power supply unit IP	IP20

AV24150IP20

ON/OFF constant-voltage PSU

Input	230Vac 50-60 Hz
Output	24Vdc 150W
Power	150W
Dimmering	ON/OFF
Power supply unit IP	IP20

AV24150IP67

ON/OFF constant-voltage PSU

Input	115-230Vac 50-60 Hz 230Vac 50-60 Hz
Output	24Vdc 150W
Dimmering	ON/OFF
Power supply unit IP	IP67

AV24240IP67

ON/OFF constant-voltage PSU

Input	115-230Vac 50-60 Hz 230Vac 50-60 Hz
Output	24Vdc 240W
Dimmering	ON/OFF
Power supply unit IP	IP67

AV24320IP67

ON/OFF constant-voltage PSU

Input	115-230Vac 50-60 Hz 230Vac 50-60 Hz
Output	24Vdc 320W
Dimmering	ON/OFF
Power supply unit IP	IP67

Control gear (1)

ADV576DALIN1

low-voltage dimmer
order in addition to PSU

Input	12-24-48Vdc
Output	With 24 Vdc input: 24Vdc 288W With 12 Vdc input: 12Vdc 144W With 48 Vdc input: 48Vdc 576W
Dimmering	1-10V, PUSH, DALI, 10kΩ potentiometer
Power supply unit IP	IP20

Control input (0)

No control inputs

Projects

Entertainment
Riflessioni Intono
FuoriSalone 2019, Brera Design District, Milan, Italy

Versions