Bright 5.F Outdoor recessed fixtures for architectural lighting

Technical data

kg 4000 - kN 40
1,35 kg
IP65
IP68
IP69
IK10

Installation	recessed for outdoor applications (not suitable for use in swimming pools or fountains)
Power consumption	14W, 19W
Power supply	24Vdc
Lumen output at source	1046 lm (3000K, 14W, CRI >90), 1131 lm (3000K, 14W, CRI 80), 1538 lm (3000K, 19W, CRI >90), 1663 lm (3000K, 19W, CRI 80)
Delivered lumen output	1117 lm (3000K, 12°, 19W, CRI >90), 1208 lm (3000K, 12°, 19W, CRI 80), 759 lm (3000K, 12°, 14W, CRI >90), 821 lm (3000K, 12°, 14W, CRI 80)
Datasheet	Bright 5.F recessed for outdoor applications (not suitable for use in swimming pools or fountains); drive-over up to 4000 kg; recessed (ceiling, wall, floor); Power consumption: 14W, 19W; Power supply: 24Vdc; Lumen output at source: 1046 lm (3000K, 14W, CRI >90), 1131 lm (3000K, 14W, CRI 80), 1538 lm (3000K, 19W, CRI >90), 1663 lm (3000K, 19W, CRI 80); Delivered lumen output: 1117 lm (3000K, 12°, 19W, CRI >90), 1208 lm (3000K, 12°, 19W, CRI 80), 759 lm (3000K, 12°, 14W, CRI >90), 821 lm (3000K, 12°, 14W, CRI 80); 3 high-intensity power LEDs, 3-step MacAdam, 50 000h L95 B10 (Ta 25°C); LED colour: 2700K, 3000K, 4000K; Optics: 10°, 18°, 31°, 35°, 56°: optical system consisting of 3 high-efficiency TIR lenses combined with a high-quality technical filter, 12°: optical system consisting of 3 high-efficiency TIR lenses, 15°x47°: optical system consisting of 3 high-efficiency TIR lenses with elliptical emission, combined with a high-quality technical filter, 67°x11° adjustable through 360°: optical system consisting of 3 high-efficiency TIR lenses combined with a high-quality elliptical technical filter and integrated with magnetic material for adjusting the ellipsis (patented); CRI Colour Rendering Index: 80, >90; Body material: body made of ANTICORODAL 6082 aluminium alloy, made entirely on a CNC lathe and then electro-coloured black. Trim in AISI 316L stainless steel, made with a CNC lathe; Screen material: 10-mm-thick transparent extra-clear glass, high transmittance to ensure chromatic uniformity of light, serigraphed grey and tempered for excellent resistance to knocks and scratches; Seals: the silicone rubber gaskets guarantee maximum resistance to UV rays and unchanging mechanical characteristics over time; Thickness of installation surface: min 5 mm, max 25 mm; power supply unit not included; includes 1.50/5/10/15/20 m neoprene cable, H05RN-F 2x0.75/0.75 Ø6.3 mm; Ingress protection: IP65, IP68, IP69; Impact resistance: IK10; 67°x11° optics adjustable through 360° using the magnet provided; Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content; This is an NTC thermistor mounted on the LED board to protect the lighting fixture against overheating. Should the product function at an operating temperature greater than the maximum temperature at which it can operate correctly, the protection is activated and gradually reduces the power. The NTC causes the integrated electronic parts to cool down to avoid the lighting fixture instantly switching itself off. When the operating temperature is again within normal range, the NTC automatically restores the lighting fixture’s original operating conditions; Operating temperature: -20°C — +45°C; Maximum device temperature: 40°C (Ta 25°C); Glow wire test: 960°; Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006; Appliance class: class III; Weight: 1350 g; Dimensions: Ø148x90 mm; Cutout dimensions: Ø125 mm; Volume of thermal heatsink: Ø260x150 mm; Energy efficiency class: F (light source) in accordance with EU 2019/2015; Accessories: honeycomb louvre, WC0501 Outer casing, WC0601 Outer casing, WC0701 Outer casing, WE0201 Magnet for adjustable optics and zoom lens, WG0200 Retaining spring clip Ø130mm; tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumptionBright 5.F recessed for outdoor applications (not suitable for use in swimming pools or fountains) drive-over up to 4000 kg recessed (ceiling, wall, floor) Power consumption: 14W, 19W Power supply: 24Vdc Lumen output at source: 1046 lm (3000K, 14W, CRI >90), 1131 lm (3000K, 14W, CRI 80), 1538 lm (3000K, 19W, CRI >90), 1663 lm (3000K, 19W, CRI 80) Delivered lumen output: 1117 lm (3000K, 12°, 19W, CRI >90), 1208 lm (3000K, 12°, 19W, CRI 80), 759 lm (3000K, 12°, 14W, CRI >90), 821 lm (3000K, 12°, 14W, CRI 80) 3 high-intensity power LEDs, 3-step MacAdam, 50 000h L95 B10 (Ta 25°C) LED colour: 2700K, 3000K, 4000K Optics: 10°, 18°, 31°, 35°, 56°: optical system consisting of 3 high-efficiency TIR lenses combined with a high-quality technical filter, 12°: optical system consisting of 3 high-efficiency TIR lenses, 15°x47°: optical system consisting of 3 high-efficiency TIR lenses with elliptical emission, combined with a high-quality technical filter, 67°x11° adjustable through 360°: optical system consisting of 3 high-efficiency TIR lenses combined with a high-quality elliptical technical filter and integrated with magnetic material for adjusting the ellipsis (patented) CRI Colour Rendering Index: 80, >90 Body material: body made of ANTICORODAL 6082 aluminium alloy, made entirely on a CNC lathe and then electro-coloured black. Trim in AISI 316L stainless steel, made with a CNC lathe Screen material: 10-mm-thick transparent extra-clear glass, high transmittance to ensure chromatic uniformity of light, serigraphed grey and tempered for excellent resistance to knocks and scratches Seals: the silicone rubber gaskets guarantee maximum resistance to UV rays and unchanging mechanical characteristics over time Thickness of installation surface: min 5 mm, max 25 mm power supply unit not included includes 1.50/5/10/15/20 m neoprene cable, H05RN-F 2x0.75/0.75 Ø6.3 mm Ingress protection: IP65, IP68, IP69 Impact resistance: IK10 67°x11° optics adjustable through 360° using the magnet provided Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content; This is an NTC thermistor mounted on the LED board to protect the lighting fixture against overheating. Should the product function at an operating temperature greater than the maximum temperature at which it can operate correctly, the protection is activated and gradually reduces the power. The NTC causes the integrated electronic parts to cool down to avoid the lighting fixture instantly switching itself off. When the operating temperature is again within normal range, the NTC automatically restores the lighting fixture’s original operating conditions Operating temperature: -20°C — +45°C Maximum device temperature: 40°C (Ta 25°C) Glow wire test: 960° Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006 Appliance class: class III Weight: 1350 g Dimensions: Ø148x90 mm Cutout dimensions: Ø125 mm Volume of thermal heatsink: Ø260x150 mm Energy efficiency class: F (light source) in accordance with EU 2019/2015 Accessories: honeycomb louvre, WC0501 Outer casing, WC0601 Outer casing, WC0701 Outer casing, WE0201 Magnet for adjustable optics and zoom lens, WG0200 Retaining spring clip Ø130mm tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption Copied

Mounting	recessed (ceiling, wall, floor)
Number and type of LED	3 high-intensity power LEDs, 3-step MacAdam, 50 000h L95 B10 (Ta 25°C)
LED colour	2700K, 3000K, 4000K
Optics	10°, 12°, 18°, 31°, 35°, 56°, 15°x47°, 67°x11° adjustable through 360°
CRI Colour Rendering Index	80, >90
Body material	body in black-anodized anticorodal aluminium, trim in AISI 316L stainless steel
Screen material	screen in serigraphed-grey and transparent, tempered extra-clear glass
Power supply unit	power supply unit not included
Power cables	includes 1.50/5/10/15/20 m neoprene cable, H05RN-F 2x0.75/0.75 Ø6.3 mm
Ingress protection	IP65, IP68, IP69
Impact resistance	IK10
Features	67°x11° optics adjustable through 360° using the magnet provided
Status	Available

Close

Customize this product

This product can be customized, thanks to our flexible in-house production. We suggest some of the possible customized versions on the right, but if you have any different requirements, we can review them together.

Possible customizations:

Finishes: anthracite, white, bronze, cor-ten, black
C2200K LED colour

Download

See all downloads

Warning

/home/http/lucelight/public_html/it/prodotto.php

723

Warning

/home/http/lucelight/public_html/it/prodotto.php

843

JPG Images
PDF Catalogue
PDF Technical sheet
PDF Instruction sheet
Datasheet TXT
DXF Technical drawing
3DS File
BIM objects
LDT Photometric file
IES Photometric file
CB marking
EU declaration of conformity

WC0501 Outer casing	WC0601 Outer casing
WC0701 Outer casing

Bright 5.F

Generate code

Technical data

Read more

Close

Customize this product

Possible customizations:

Download

Gallery

Accessories and power supply units

Accessories (6)

Outer casings

WC0501

Outer casing

WC0601

Outer casing

WC0701

Outer casing

Retaining spring clips

WG0200

Retaining spring clip Ø130mm

Honeycomb louvre

Add the optical accessory in the code generator

honeycomb louvre

Spare parts

WE0201

Magnet for adjustable optics and zoom lens

Cables

Power supply units (22)

ACUNI020T1

ON/OFF constant-current PSU

AD020DALIT1

DALI dimmable power supply unit

AD032TLT1

Dimmable power supply unit

ADUNITC

1-10V+PUSH dimmable power supply unit

AV00002406020

ON/OFF constant-voltage PSU

AV00002412020

ON/OFF constant-voltage PSU

AV00002418020

ON/OFF constant-voltage PSU

AV0D024V03066

DALI 2 + PUSH dimmable power supply unit

AV0D024V06066

DALI 2 + PUSH dimmable power supply unit

AV0D024V10066

DALI 2 + PUSH dimmable power supply unit

AV0D024V15066

DALI 2 + PUSH dimmable power supply unit

AV0D024V20066

DALI 2 + PUSH dimmable power supply unit

AV0D024V30066

DALI 2 + PUSH dimmable power supply unit

AV24020IP67

ON/OFF constant-voltage PSU

AV24040IP67

ON/OFF constant-voltage PSU

AV24060IP20

ON/OFF constant-voltage PSU

AV24060IP67

ON/OFF constant-voltage PSU

AV24100IP20

ON/OFF constant-voltage PSU

AV24150IP20

ON/OFF constant-voltage PSU

AV24150IP67

ON/OFF constant-voltage PSU

AV24240IP67

ON/OFF constant-voltage PSU

AV24320IP67

ON/OFF constant-voltage PSU

Control gear (4)

ADV576DALIN1

Low-voltage dimmer

ARVUNID2-01

Universal sequencer - Low-voltage 4-channel controller with constant-voltage output

1 channel

2 channels