Siri Blvd 1.0 urban lighting, projector on short arm
pole mounted Ø60 mm
Power consumption: 38W
Power supply: 230Vac
Lumen output at source: 3402 lm (3000K)
Delivered lumen output: 2081 lm (3000K, footpath), 2110 lm (3000K, pedestrian zone), 2134 lm (3000K, cycle path), 2180 lm (3000K, asymmetrical)
4 high-intensity power LEDs, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: asymmetrical, cycle path, footpath, pedestrian zone
CRI Colour Rendering Index: 80
Body material: body in die-cast aluminium
Finishes: anthracite
RAL finish on request
Screen material: screen in serigraphed, tempered extra-clear glass
built-in power supply unit
includes 5 m neoprene cable, H05RN-F 2X1,0 Ø7,0 mm
Control system: ON/OFF, Virtual midnight
Ingress protection: IP66
Impact resistance: IK06
Max exposed surface: 0,056 m², Lateral surface: 0,021 m²
double-beam version available on request; DALI version available on request, Casambi-compatible version, controllable with the Casambi app, available on request
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content; The SPD (Surge Protection Device) protects lighting fixtures from electrical phenomena external to the system, such as power surges. In particular, this device is specifically for protection against serious events with a high energy content; This is an NTC thermistor mounted on the LED board to protect the lighting fixture against overheating. Should the product function at an operating temperature greater than the maximum temperature at which it can operate correctly, the protection is activated and gradually reduces the power. The NTC causes the integrated electronic parts to cool down to avoid the lighting fixture instantly switching itself off. When the operating temperature is again within normal range, the NTC automatically restores the lighting fixture’s original operating conditions
Operating temperature: -20°C — +45°C
Glow wire test: 960°
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class II
Weight: 4600 g
Dimensions: 189x371x124 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption