Siri 3.2 Projectors for architectural lighting of large buildings - L&L Luce&Light

Siri 3.2

Projectors for outdoor applications

projector for outdoor applications - 33W 24Vdc - adjustable 200° - RGBW

Technical data

Print technical data

kg 2,06
IP66
IK06

Installation	projector for outdoor applications
Power consumption	33W
Power supply	24Vdc
Lumen output at source	2148 lm, R: 336 lm G: 594 lm B: 238 lm W: 980 lm (4000K)
Delivered lumen output	1532 lm, R: 240 lm G: 423 lm B: 170 lm W: 699 lm (4000K, 32°)
Datasheet	Siri 3.2 projector for outdoor applications; surface mounted (ceiling, wall, ground, spike); Power consumption: 33W; Power supply: 24Vdc; Lumen output at source: 2148 lm, R: 336 lm G: 594 lm B: 238 lm W: 980 lm (4000K); Delivered lumen output: 1532 lm, R: 240 lm G: 423 lm B: 170 lm W: 699 lm (4000K, 32°); 9 RGBW power LED groups, 50 000h L90 B10 (Ta 25°C); LED colour: RGBW; Optics: 21°, 32°, 58°, 30°x60°, 60°x30°: optical system consisting of a high-efficiency TIR lens combined with a high-quality technical filter; Body material: body made of low-copper-content die-cast aluminium alloy EN AB 47100 for excellent resistance to corrosion; Finishes: grey finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9006), white finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003), anthracite finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, cor-ten finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector; RAL finish on request; Screen material: 4-mm-thick transparent extra-clear glass with vitrified serigraphy, high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches; power supply unit not included; includes 1,5 m FEP+RUB cable (equivalent to H05RN-F cable), 4x0,50/0,50 Ø6,3 mm; Ingress protection: IP66; Impact resistance: IK06; Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; Operating temperature: -20°C — +45°C; Glow wire test: 960°; Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006; Appliance class: class III; Weight: 2060 g; Dimensions: 283x189x48 mm; Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012; Accessories: WB5030H Anti-glare hood - anthracite, WP0300 Spike for in-ground installation; tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumptionSiri 3.2 projector for outdoor applications surface mounted (ceiling, wall, ground, spike) Power consumption: 33W Power supply: 24Vdc Lumen output at source: 2148 lm, R: 336 lm G: 594 lm B: 238 lm W: 980 lm (4000K) Delivered lumen output: 1532 lm, R: 240 lm G: 423 lm B: 170 lm W: 699 lm (4000K, 32°) 9 RGBW power LED groups, 50 000h L90 B10 (Ta 25°C) LED colour: RGBW Optics: 21°, 32°, 58°, 30°x60°, 60°x30°: optical system consisting of a high-efficiency TIR lens combined with a high-quality technical filter Body material: body made of low-copper-content die-cast aluminium alloy EN AB 47100 for excellent resistance to corrosion Finishes: grey finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9006), white finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003), anthracite finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, cor-ten finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector RAL finish on request Screen material: 4-mm-thick transparent extra-clear glass with vitrified serigraphy, high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches power supply unit not included includes 1,5 m FEP+RUB cable (equivalent to H05RN-F cable), 4x0,50/0,50 Ø6,3 mm Ingress protection: IP66 Impact resistance: IK06 Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit Operating temperature: -20°C — +45°C Glow wire test: 960° Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006 Appliance class: class III Weight: 2060 g Dimensions: 283x189x48 mm Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012 Accessories: WB5030H Anti-glare hood - anthracite, WP0300 Spike for in-ground installation tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption Copied

Mounting	surface mounted (ceiling, wall, ground, spike)
Number and type of LED	9 RGBW power LED groups, 50 000h L90 B10 (Ta 25°C)
LED colour	RGBW
Optics	21°, 32°, 58°, 30°x60°, 60°x30°
Body material	body in die-cast aluminium
Screen material	screen in serigraphed, transparent and tempered extra-clear glass
Finishes	grey, white, anthracite, cor-ten
Power supply unit	power supply unit not included
Power cables	includes 1,5 m FEP+RUB cable (equivalent to H05RN-F cable), 4x0,50/0,50 Ø6,3 mm
Ingress protection	IP66
Impact resistance	IK06
Status	Available

Read more

Close

Download

See all downloads

Accessories and power supply units

Accessories (2)

Spikes and arms

WP0300

Spike for in-ground installation

Anti-glare screens

WB5030H

Anti-glare hood - anthracite

On request, the anti-glare hood is available in the same finish as the lighting fixture

Power supply units (11)

AV00002406020

ON/OFF constant-voltage PSU

Input	230Vac 50-60 Hz
Output	24Vdc; 60W
Power	60W
Dimmering	ON/OFF
Power supply unit IP	IP20

AV00002412020

ON/OFF constant-voltage PSU

Input	230Vac 50-60 Hz
Output	24Vdc; 120W
Power	120W
Dimmering	ON/OFF
Power supply unit IP	IP20

AV00002418020

ON/OFF constant-voltage PSU

Input	230Vac 50-60 Hz
Output	24Vdc; 180W
Power	180W
Dimmering	ON/OFF
Power supply unit IP	IP20

AV24040IP67

ON/OFF constant-voltage PSU

Input	115-230Vac 50-60 Hz 230Vac 50-60 Hz
Output	24Vdc; 40W
Dimmering	ON/OFF
Power supply unit IP	IP67

AV24060IP20

ON/OFF constant-voltage PSU

Input	230Vac 50-60 Hz
Output	24Vdc; 60W
Dimmering	ON/OFF
Power supply unit IP	IP20

AV24060IP67

ON/OFF constant-voltage PSU

Input	115-230Vac 50-60 Hz 230Vac 50-60 Hz
Output	24Vdc; 60W
Dimmering	ON/OFF
Power supply unit IP	IP67

AV24100IP20

ON/OFF constant-voltage PSU

Input	230Vac 50-60 Hz
Output	24Vdc; 100W
Dimmering	ON/OFF
Power supply unit IP	IP20

AV24150IP20

ON/OFF constant-voltage PSU

Input	230Vac 50-60 Hz
Output	24Vdc; 150W
Power	150W
Dimmering	ON/OFF
Power supply unit IP	IP20

AV24150IP67

ON/OFF constant-voltage PSU

Input	115-230Vac 50-60 Hz 230Vac 50-60 Hz
Output	24Vdc; 150W
Dimmering	ON/OFF
Power supply unit IP	IP67

AV24240IP67

ON/OFF constant-voltage PSU

Input	115-230Vac 50-60 Hz 230Vac 50-60 Hz
Output	24Vdc; 240W
Dimmering	ON/OFF
Power supply unit IP	IP67

AV24320IP67

ON/OFF constant-voltage PSU

Input	115-230Vac 50-60 Hz 230Vac 50-60 Hz
Output	24Vdc; 320W
Dimmering	ON/OFF
Power supply unit IP	IP67

Control gear (4)

ARVUNID2

Universal sequencer - Low-voltage 4-channel controller with constant-voltage output

order in addition to PSU

Input	12-24Vdc
Output	4 channels With 24 Vdc input:; 24Vdc; 384W 1 channel With 12 Vdc input:; 12Vdc; 60W With 24 Vdc input:; 24Vdc; 120W 2 channels With 12 Vdc input:; 12Vdc; 192W With 24 Vdc input:; 24Vdc; 384W 3 channels With 12 Vdc input:; 12Vdc; 180W With 24 Vdc input:; 24Vdc; 360W 4 channels With 12 Vdc input:; 12Vdc; 192W
Dimmering	0/1-10V, PUSH, DALI, ON/OFF, 10kΩ potentiometer, DMX512, DMX512+RDM, Stand alone
Power supply unit IP	IP20

ECCTR1244CV20

Router / controller WIFI/RF 4x4A RGBW

order in addition to PSU

Input	12-24Vdc
Output	With 24 Vdc input:; 24Vdc; 384W With 12 Vdc input:; 12Vdc; 192W
Dimmering	Radio frequency
Power supply unit IP	IP20

ECCTS5244CV20

RGB/RGBW controller with integrated 4-channel receiver

order in addition to PSU
to be used with TOUCH03L1, TOUCH02L1 e ECCTR1244CV20

Input	12-24Vdc
Output	With 24 Vdc input:; 24Vdc; 480W With 12 Vdc input:; 12Vdc; 240W
Dimmering	Radio frequency
Power supply unit IP	IP20

TLR02

RGB/RGBW controller with integrated 4-channel receiver

order in addition to PSU
Required TLC08 or TLC09 remote control, not included

Input	12-24Vdc
Output	4 channels With 24 Vdc input:; 24Vdc; 240W 3 channels With 12 Vdc input:; 12Vdc; 90W With 24 Vdc input:; 24Vdc; 180W 4 channels With 12 Vdc input:; 12Vdc; 120W
Dimmering	Stand alone
Power supply unit IP	IP20

Control input (5)

TLC05

Radio control with 4 channels

Input	1 x 12V alkaline battery
Output	433,90 MHz
Ingress protection	IP20
Dimensions	Ø85x28 mm

TLC06

Radio control with 2 channels

Input	1 x 3V CR2025 battery
Output	433,90 MHz
Ingress protection	IP20
Dimensions	55x28x10 mm

TLC08

Remote control for TLR02, TLR04M-350-500 and TLR04M-350-700 controllers

Input	CR2450 battery
Output	433,92 MHz
Ingress protection	IP20
Dimensions	40x40x10 mm

TLC09

Remote control for TLR02, TLR04M-350-500 and TLR04M-350-700 controllers

Input	CR2450 battery
Output	433,92 MHz
Ingress protection	IP20
Dimensions	40x40x10 mm

TLR01

Receiver required for TLC05 and TLC06 remote control

Input	12─24Vdc
Output	2 clean contacts
Ingress protection	IP20
Dimensions	90x53x28 mm

Projects

Entertainment
Space Made Light
Trani, Barletta-Andria-Trani, Italy

Versions