Rondò 3.2 Drive-over guidance step lights for paths and car parks - L&L Luce&Light

Search

Rondò 3.2

Step lights for outdoor applications

step light for outdoor applications - 5W 24Vdc/230Vac - double beam - ø160 mm - drive-over

Technical data

Print technical data

Updated to RD32105AI

kg 5000 - kN 50
kg 1,80
IP67
IK08

Installation	step light for outdoor applications, double beam
Power consumption	5W
Power supply	230Vac
Lumen output at source	370 lm (3000K)
Delivered lumen output	180 lm (3000K, radial optics)
Datasheet	Rondò 3.2 code: RD32105AI step light for outdoor applications, double beam; drive-over up to 5000 kg; recessed (floor); Power consumption: 5W; Power supply: 230Vac; Lumen output at source: 370 lm (3000K); Delivered lumen output: 180 lm (3000K, radial optics); 2 power LEDs, 1/4 ANSI BIN, 50 000h L95 B10 (Ta 25°C); LED colour: 3000K; Optics: radial: optical system consisting of a high-efficiency TIR lens; Upward flux fraction: 38,18% (radial optics), 21,13% (10°); CRI Colour Rendering Index: 80; Body material: body made of micro-cast AISI 316L stainless steel, produced entirely on a CNC lathe; Finishes: stainless steel finish obtained through micro-shot peening, an electrolytic passivation treatment and electropolishing; RAL finish on request; Screen material: Rilsan® Clear protective screen in clear PA12 polyamide with high mechanical and optical performance; Seals: O-ring in 4-mm expanded silicone; built-in power supply unit; includes 1.5 m neoprene cable H07RN-F 3x1,0 Ø8,7 mm; Ingress protection: IP67; Impact resistance: IK08; Casambi control using the Casambi app with dedicated electronics; Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content; Operating temperature: -20°C — +45°C; Maximum device temperature: 45°C (Ta 25°C); Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006; Appliance class: class I; Weight: 1800 g; Dimensions: Ø160x87 mm; Energy efficiency class: F (light source) in accordance with EU 2019/2015; Accessories: WC0601 Outer casing, WC0701 Outer casing, WE0100 Tool for tamper-resistant screws; tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumptionRondò 3.2 code: RD32105AI step light for outdoor applications, double beam drive-over up to 5000 kg recessed (floor) Power consumption: 5W Power supply: 230Vac Lumen output at source: 370 lm (3000K) Delivered lumen output: 180 lm (3000K, radial optics) 2 power LEDs, 1/4 ANSI BIN, 50 000h L95 B10 (Ta 25°C) LED colour: 3000K Optics: radial: optical system consisting of a high-efficiency TIR lens Upward flux fraction: 38,18% (radial optics), 21,13% (10°) CRI Colour Rendering Index: 80 Body material: body made of micro-cast AISI 316L stainless steel, produced entirely on a CNC lathe Finishes: stainless steel finish obtained through micro-shot peening, an electrolytic passivation treatment and electropolishing RAL finish on request Screen material: Rilsan® Clear protective screen in clear PA12 polyamide with high mechanical and optical performance Seals: O-ring in 4-mm expanded silicone built-in power supply unit includes 1.5 m neoprene cable H07RN-F 3x1,0 Ø8,7 mm Ingress protection: IP67 Impact resistance: IK08 Casambi control using the Casambi app with dedicated electronics Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content Operating temperature: -20°C — +45°C Maximum device temperature: 45°C (Ta 25°C) Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006 Appliance class: class I Weight: 1800 g Dimensions: Ø160x87 mm Energy efficiency class: F (light source) in accordance with EU 2019/2015 Accessories: WC0601 Outer casing, WC0701 Outer casing, WE0100 Tool for tamper-resistant screws tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption Copied

Mounting	recessed (floor)
Number and type of LED	2 power LEDs, 1/4 ANSI BIN, 50 000h L95 B10 (Ta 25°C)
LED colour	3000K
Optics	radial
CRI Colour Rendering Index	80
Body material	body in AISI 316L stainless steel
Screen material	screen in Rilsan® Clear
Finishes	stainless steel
Power supply unit	built-in power supply unit
Power cables	includes 1.5 m neoprene cable H07RN-F 3x1,0 Ø8,7 mm
Ingress protection	IP67
Impact resistance	IK08
Status	Available

Read more

Close

Customize this product

This product can be customized, thanks to our flexible in-house production. We suggest some of the possible customized versions on the right, but if you have any different requirements, we can review them together.

Possible customizations:

2200K LED colour

Download

See all downloads

JPG Images
PDF Catalogue
PDF Technical sheet
PDF Instruction sheet
Datasheet TXT Type
- Generic, for the product Rondò 3.2
- Specific, for code RD32105AI
DXF Technical drawing
LDT Photometric file Type
- Generic, for the product Rondò 3.2
- Specific, for code RD32105AI
IES Photometric file Type
- Generic, for the product Rondò 3.2
- Specific, for code RD32105AI
CB marking
EU declaration of conformity

Accessories and power supply units

Accessories (3)

Accessories for product code RD32105AI

Outer casings

WC0601

Outer casing

WC0701

Outer casing

Spare parts

WE0100

Tool for tamper-resistant screws

Power supply units (0)

Power supply units for product code RD32105AI

No power supply units

Control gear (0)

Control gear for product code RD32105AI

No controllers

Control input (2)

AE01350T1

Emergency module integrated

Input	220─240Vac 50─60Hz
Output	max 350mA 58Vdc max
Ingress protection	IP20
Dimensions	35x47x166 mm, 185 g
Cutout dimensions	Ø58 mm

EC0TIM12840020

Timer for CASAMBI

Input	12-48 Vdc
Ingress protection	IP20
Dimensions	45x58x25 mm, 40g

Projects

Versions