Rondò 2.1

Step lights for outdoor applications

step light for outdoor applications - 2W 24Vdc - single beam - ø100 mm - drive-over

Technical data

  • complies with the European standard EN 60598-1
  • CMIM
  • lighting fixture with LED technology
  • appliance class III
  • drive-over fixture
    kg 5000 - kN 50
  • gross weight
    kg 0,73
  • IP67
  • IK08
  • IPS
  • RAL finish on request
  • maximum device temperature45°C
  • A/A+/A++
Installation step light for outdoor applications, single beam
Power consumption 2W
Power supply 24Vdc
Lumen output at source 185 lm (3000K)
Delivered lumen output 85 lm (3000K, radial optics)
Datasheet
Rondò 2.1 step light for outdoor applications, single beam
drive-over up to 5000 kg
recessed (floor)
Power consumption: 2W
Power supply: 24Vdc
Lumen output at source: 185 lm (3000K)
Delivered lumen output: 85 lm (3000K, radial optics)
1 power LED, 1/4 ANSI BIN, 50 000h L95 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: 10°: optical system consisting of a high-efficiency lens that produces a narrow light beam, radial: optical system consisting of a high-efficiency TIR lens
Upward flux fraction: 46,15% (radial optics), 30,61% (10°)
CRI Colour Rendering Index: 80
Body material: body made of micro-cast AISI 316L stainless steel, produced entirely on a CNC lathe
Finishes: cor-ten finish obtained through micro-shot peening, an electrolytic passivation treatment and electropolishing; then painted through an initial treatment with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance equal to more than 1000 hours of salt spray testing. Paints compliant with the Qualicoat standard used in the automotive sector, anthracite finish obtained through micro-shot peening, an electrolytic passivation treatment and electropolishing; then painted through an initial treatment with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance equal to more than 1000 hours of salt spray testing. Paints compliant with the Qualicoat standard used in the automotive sector, stainless steel finish obtained through micro-shot peening, an electrolytic passivation treatment and electropolishing
RAL finish on request
Screen material: Rilsan® Clear protective screen in clear PA12 polyamide with high mechanical and optical performance
Seals: O-ring in 4-mm expanded silicone
power supply unit not included
includes 1,5 m neoprene cable, H05RN-F 2x0,35/0,75 Ø6,3 mm
Ingress protection: IP67
Impact resistance: IK08
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit
Operating temperature: -20°C — +45°C
Maximum device temperature: 45°C (Ta 25°C)
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class III
Weight: 730 g
Dimensions: Ø100x48 mm
Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012
Accessories: WC0100 Outer casing, WC0103 Outer casing, WC0150 Outer casing, WE0100 Tool for tamper-resistant screws
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption
Mounting recessed (floor)
Number and type of LED 1 power LED, 1/4 ANSI BIN, 50 000h L95 B10 (Ta 25°C)
LED colour 2700K, 3000K, 4000K
Optics 10°, radial
CRI Colour Rendering Index 80
Body material body in AISI 316L stainless steel
Screen material screen in Rilsan® Clear
Finishes cor-ten, anthracite, micro-blasted stainless steel
Power supply unit power supply unit not included
Power cables includes 1,5 m neoprene cable, H05RN-F 2x0,35/0,75 Ø6,3 mm
Ingress protection IP67
Impact resistance IK08
Status Available