Intono B 1.1 bollard for outdoor applications
surface mounted (floor)
Power consumption: 9W
Power supply: 230Vac
Lumen output at source: 689 lm (3000K)
Delivered lumen output: 331 lm (3000K, DIFFUSE)
1 power LED High Intensity, 3-step MacAdam, 60 000h L90 B10 (Ta 25°C)
LED colour: 2200K, 2700K, 3000K, 4000K
Optics: asymmetrical, diffuse
CRI Colour Rendering Index: 80
Body material: body made of low-copper-content die-cast aluminium alloy EN AB 47100 for excellent resistance to corrosion. AISI 304 stainless steel bollard
Finishes: cor-ten finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, anthracite finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, grey finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9006), white finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003)
RAL finish on request
Screen material: 4-mm-thick acid-etched, tempered extra-clear glass, with grey-vitrified serigraphy (RAL 7015) resistant to knocks and scratches, and with high transmittance to eliminate chromatic aberrations
built-in power supply unit
Control system: DALI-2, ON/OFF
Ingress protection: IP66
Impact resistance: IK06
Operating temperature: -20°C — +50°C
Glow wire test: 850°C
Photobiological safety: in accordance with IEC TR 62778:2014
Appliance class: class II
Weight: 2150 g
Dimensions: Ø99x124x600 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: anti-glare screen, WPA00 Spike for in-ground installation
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption