Reiko 1.0 projector for outdoor applications
surface mounted (ceiling, wall, ground, spike)
Power consumption: 2,5W, 3,5W
Power supply: 24Vdc
Lumen output at source: 168 lm (3000K, 2,5W, CRI >90), 212 lm (3000K, 2,5W, CRI 80), 236 lm (3000K, 3,5W, CRI >90), 297 lm (3000K, 3,5W, CRI 80)
Delivered lumen output: 104 lm (3000K, 21°, 2.5W, CRI >90), 130 lm (3000K, 21°, 2.5W, CRI 80), 145 lm (3000K, 21°, 3.5W, CRI >90), 182 lm (3000K, 21°, 3.5W, CRI 80)
1 power LED, 2-step MacAdam, 60 000h L90 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: 17°, 21°, 38°, 59°: optical system consisting of a high-efficiency TIR lens combined with a high-quality technical filter, sharp 38°: SHARP optical system consisting of a plano-convex lens for an extremely well-defined light beam, combined with a high-quality technical filter, 18°x34°, 34°x18°: optical system consisting of a high-efficiency TIR lens
CRI Colour Rendering Index: 80, >90
Body material: body made of low-copper-content die-cast aluminium alloy EN AB 47100 for excellent resistance to corrosion. Bracket in AISI 316L stainless steel, tumble finished and painted
Finishes: jasper green finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, white finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003), anthracite finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, cor-ten finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, grey finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9006)
RAL finish on request
Screen material: 4-mm-thick transparent extra-clear glass, with high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches, with RAL 7015 grey vitrified serigraphy around the edge
power supply unit not included
includes 1.50/5/10/15/20 m neoprene cable H05RN-F 2x0.75/0.75 Ø6.3 mm
Ingress protection: IP66
Impact resistance: IK06
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content
Operating temperature: -20°C — +50°C
Glow wire test: 960°
Photobiological safety: in accordance with IEC TR 62778:2014
Appliance class: class III
Weight: 250 g
Dimensions: 35x35x50 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: honeycomb louvre, WBA085 Standard square snoot - jasper green, WBA08E Standard square snoot - white, WBA08F Standard square snoot - grey, WBA08H Standard square snoot - anthracite, WBA08T Standard square snoot - cor-ten, WBA095 Asymmetrical square snoot - jasper green, WBA09E Asymmetrical square snoot - white, WBA09F Asymmetrical square snoot - grey, WBA09H Asymmetrical square snoot - anthracite, WBA09T Asymmetrical square snoot - cor-ten, WF3302 Flexible cable-protection tube - 18 cm, WP0100 Spike for in-ground installation, WP1004 Fastener strap - 5 m
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption