Goccia 1.4

Step lights for outdoor applications

step light for outdoor applications - 0.6W 12Vac / 0.7W 12Vdc / 1.5W 24Vdc - Ø26 mm

Technical data

  • CE mark for the European Union
  • UKCA mark for Great Britain
  • EAC
  • lighting fixture with LED technology
  • appliance class III
  • walkover fixture
  • gross weight
    kg 0.060
  • cut-out size
  • IP65
  • IP68
  • IK10
  • Casambi control
  • maximum device temperature40°C
  • F
Installation step light for outdoor applications (not suitable for use in immersion in swimming pools or fountains)
Power consumption 0,6W (12Vac), 0,7W (12Vdc), 1,5W (24Vdc)
Power supply 12Vdc; 24Vdc; 12Vac
Lumen output at source 50 lm (3000K)
Delivered lumen output 15 lm (3000K)
Datasheet
Goccia 1.4 step light for outdoor applications (not suitable for use in immersion in swimming pools or fountains)
walkover
recessed (wall, floor)
Power consumption: 0,6W (12Vac), 0,7W (12Vdc), 1,5W (24Vdc)
Power supply: 12Vdc; 24Vdc; 12Vac
Lumen output at source: 50 lm (3000K)
Delivered lumen output: 15 lm (3000K)
1 mid-power LED, 3-step MacAdam, 60 000h L80 B10 (Ta 25°C)
LED colour: 2200K, 2700K, 3000K, 4000K
Optics: diffuse: uniform diffuse output obtained through a mixing chamber built into the polyurethane resin body
CRI Colour Rendering Index: 80
Body material: moulded polyurethane resin body. Internal aluminium heat sink. Nitril rubber O-ring to seal the outer casing
Seals: The NBR nitrile rubber O-rings ensure the fixture’s IP rating is preserved, guaranteeing continued protection
12Vdc; 24Vdc; 12Vac
includes 1.50/5 m neoprene cable, 05RN-F 2x0.35 Ø4.6 mm
Ingress protection: IP65, IP68
Impact resistance: IK10
Operating temperature: -20°C — +45°C
Maximum device temperature: 40°C (Ta 25°C)
Glow wire test: 960°
Photobiological safety: in accordance with IEC TR 62778:2014
Appliance class: class III
Weight: 60 g
Dimensions: Ø26x25 mm
Volume of thermal heatsink: Ø55x70 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WCA09 Outer casing for solid walls, WCA25 Outer casing for plasterboard
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption
Mounting recessed (wall, floor)
Number and type of LED 1 mid-power LED, 3-step MacAdam, 60 000h L80 B10 (Ta 25°C)
LED colour 2200K, 2700K, 3000K, 4000K
Optics diffuse
CRI Colour Rendering Index 80
Body material resin body
Power supply unit 12Vdc; 24Vdc; 12Vac
Power cables includes 1.50/5 m neoprene cable, 05RN-F 2x0.35 Ø4.6 mm
Ingress protection IP65, IP68
Impact resistance IK10
Status Available