Quilatero 3.4 code: QL3410000150LT recessed for outdoor applications
drive-over up to 2500 kg
walkover
recessed (wall, floor)
Power consumption: 16W
Power supply: 110-230Vac
Lumen output at source: 1616 lm (3000K, CRI 80)
Delivered lumen output: 1226 lm (3000K, CRI 80, 26°)
1 COB LED, 2-step MacAdam, 60 000h L80 B10 (Ta 25°C)
LED colour: 3000K
Optics: 39° tiltable +20°: optical system consisting of a deep-set, high-efficiency TIR lens
CRI Colour Rendering Index: 80
Body material: body made of heat-dissipating, carbon-fibre-reinforced semicrystalline technopolymer with a thermal conductivity equal to that of stainless steel and high resistance to impact and sub-zero temperatures, and to corrosion even in harsh environments (saline). Trim in AISI 316L stainless steel, laser cut, machined and finished
Finishes: cor-ten finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 2000 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector
RAL finish on request
Screen material: 10-mm-thick transparent extra-clear glass, high transmittance to ensure chromatic uniformity of light, serigraphed grey (RAL 7015), and tempered for excellent impact and scratch resistance
Seals: the silicone rubber O-rings guarantee excellent, continued resistance to UV rays, resistance to water infiltration, and unchanging mechanical characteristics
Installation: product complete with IP68 connector and built-in IPS system. Compatible with H07RN-F cable with minimum cross-section 2x1 and cable Ø min. 7 mm max. 12 mm. Simplified connection for quick, effective installation. Easy installation on the relative outer casing using mounting clip built into the lighting fixture
built-in power supply unit
Ingress protection: IP68 72h, IP67 with purpose-built outer casing, IP68 with purpose-built outer casing, IP69
Impact resistance: IK10
optics tiltable by up to 20° by means of a magnetic system with graduations and locking screw. Fast installation: direct connection between fixture and mains power supply
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit
Operating temperature: -20°C — +45°C
Maximum device temperature: 40°C (Ta 25°C)
Glow wire test: 960°C
Photobiological safety: in accordance with IEC TR 62778:2014
Appliance class: class II
Weight: 1670 g
Dimensions: 170x170x163 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: honeycomb louvre, WCA15 Outer casing
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption