Quilatero 2.4

Recessed for outdoor applications

recessed for outdoor applications - 8W 110-230Vac - tiltable optics +20° - 130x130 mm

Technical data

Required outer casing not included
  • conforme alla normativa Europea EN 60598-1
  • EAC
  • lighting fixture with LED technology
  • appliance class II
  • drive-over fixture
    kg 2000 - kN 20
  • gross weight
    1,02
  • IP6872h
  • IP66
  • IP69K
  • IK10
  • IPS
  • PID
  • RAL finish on request
  • maximum device temperature40°C
  • A/A+/A++
Installation recessed for outdoor applications
Power consumption 8W
Power supply 110-230Vac
Lumen output at source 526 lm (3000K, CRI >90),
657 lm (3000K, CRI 80)
Delivered lumen output 389 lm (3000K, CRI >90, 12°),
482 lm (3000K, CRI 80, 12°)
Datasheet
Quilatero 2.4 recessed for outdoor applications
drive-over up to 2000 kg
recessed (wall, floor)
Power consumption: 8W
Power supply: 110-230Vac
Lumen output at source: 526 lm (3000K, CRI >90), 657 lm (3000K, CRI 80)
Delivered lumen output: 389 lm (3000K, CRI >90, 12°), 482 lm (3000K, CRI 80, 12°)
1 high-intensity power LED, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: 8° tiltable +20°: optical system consisting of a high-efficiency TIR lens combined with a high-quality technical filter, 12° tiltable +20°, 34° tiltable +20°: optical system consisting of a deep-set, high-efficiency TIR lens, 18° tiltable +20°, 47° tiltable +20°, 20°x47° tiltable +20°: optical system consisting of a high-efficiency, deep-set TIR lens combined with a high-quality technical filter, sharp 63° tiltable +20°: SHARP optical system consisting of a deep-set plano-convex lens for an extremely well-defined light beam
CRI Colour Rendering Index: 80, >90
Body material: body made of heat-dissipating, carbon-fibre-reinforced semicrystalline technopolymer with a thermal conductivity equal to that of stainless steel and with high resistance to impact and sub-zero temperatures, and to corrosion even in harsh environments (saline). Trim in AISI 316L stainless steel, laser cut, machined and finished, then micro-blasted, passivated and electropolished to guarantee excellent corrosion resistance (version with trim in stainless steel), body made of heat-dissipating, carbon-fibre-reinforced semicrystalline technopolymer with a thermal conductivity equal to that of stainless steel and high resistance to impact and sub-zero temperatures, and to corrosion even in harsh environments (saline). Trim in AISI 316L stainless steel, laser cut, machined and finished (version with cor-ten trim)
Finishes: micro-blasted stainless steel, cor-ten finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide greater resistance to corrosion. Paints compliant with the Qualicoat standard used in the automotive sector
RAL finish on request
Screen material: 10-mm-thick transparent extra-clear glass, high transmittance to ensure chromatic uniformity of light, serigraphed grey (RAL 7015), and tempered for excellent impact and scratch resistance
Seals: the silicone rubber gaskets guarantee maximum resistance to UV rays and unchanging mechanical characteristics over time
Installation: product complete with IP68 connector and built-in IPS system. Compatible with H07RN-F cable with minimum cross-section 2x1 and cable Ø min. 7 mm max. 12 mm. Simplified connection for quick, effective installation. Easy installation on the relative outer casing using mounting clip built into the lighting fixture
built-in power supply unit
Ingress protection: IP68 72h, IP66, IP69K
Impact resistance: IK10
optics tiltable by up to 20° by means of a magnetic system with graduations and locking screw
Casambi-compatible version, controllable with the Casambi app, available on request
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content
Operating temperature: -20°C — +45°C
Maximum device temperature: 40°C (Ta 25°C)
Glow wire test: 960°
Photobiological safety: in accordance with IEC TR 62778:2014
Appliance class: class II
Weight: 1020 g
Dimensions: 130x130x135 mm
Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012
Accessories: honeycomb louvre, anti-glare screen, WCA14 Outer casing
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption
Mounting recessed (wall, floor)
Number and type of LED 1 high-intensity power LED, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C)
LED colour 2700K, 3000K, 4000K
Optics 8° tiltable +20°, 12° tiltable +20°, 18° tiltable +20°, 34° tiltable +20°, 47° tiltable +20°, sharp 63° tiltable +20°, 20°x47° tiltable +20°
CRI Colour Rendering Index 80, >90
Body material body in thermally conductive plastic, trim in AISI 316L stainless steel
Screen material screen in serigraphed-grey and transparent, tempered extra-clear glass
Finishes micro-blasted stainless steel, cor-ten
Power supply unit built-in power supply unit
Ingress protection IP68 72h, IP66, IP69K
Impact resistance IK10
Features optics tiltable by up to 20° by means of a magnetic system with graduations and locking screw
Notes Casambi-compatible version, controllable with the Casambi app, available on request
Status Available