Berica OUT 2.0

Wall mounted for outdoor applications

wall mounted for outdoor applications, double beam - 15W 230Vac - 120x220x48 mm

Technical data

  • CE mark for the European Union
  • UKCA mark for Great Britain
  • EAC
  • lighting fixture with LED technology
  • appliance class II
  • gross weight
    0,95 kg
  • IP65
  • IK07
  • RAL finish on request
  • primer
  • F
Installation wall mounted for outdoor applications, double beam
Power consumption 15W
Power supply 230Vac
Lumen output at source 1542 lm (3000K, CRI >90),
1814 lm (3000K, CRI 80)
Delivered lumen output 1268 lm (3000K, diffuse, CRI >90),
1490 lm (3000K, diffuse, CRI 80)
Datasheet
Berica OUT 2.0 wall mounted for outdoor applications, double beam
surface mounted (ceiling, wall)
Power consumption: 15W
Power supply: 230Vac
Lumen output at source: 1542 lm (3000K, CRI >90), 1814 lm (3000K, CRI 80)
Delivered lumen output: 1268 lm (3000K, diffuse, CRI >90), 1490 lm (3000K, diffuse, CRI 80)
24 mid-power LEDs, 2-step MacAdam, 50 000h L80 B10 (Ta 25°C)
LED colour: 2200K, 2700K, 3000K, 4000K
Optics: 42°x102°, 62°x100°, asymmetrical, diffuse: optical system consisting of a high-efficiency PMMA linear lens made by an extrusion process
CRI Colour Rendering Index: 80, >90
Body material: body and flat cover made of low-copper-content ANTICORODAL® EN AW 6060 T5 aluminium alloy for excellent resistance to corrosion. Body and flat cover made by an extrusion process and subsequently finished by CNC milling. End caps made of low-copper-content die-cast aluminium alloy EN AB 46100 for excellent resistance to corrosion
Finishes: body painted white (RAL 9003). Cover and end caps painted in a cor-ten finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints comply with the Qualicoat standard used in the automotive sector, body painted white (RAL 9003). Cover and end caps painted in an anthracite finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints comply with the Qualicoat standard used in the automotive sector, body, cover and end caps painted in a white finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints comply with the Qualicoat standard used in the automotive sector (RAL 9003), Body painted white (RAL 9003). Cover and end caps painted through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of primer, which enables the fixture to be finished with paints such as two-pack polyurethane varnishes and two-pack acrylic paints suitable for masonry surfaces
RAL finish on request
Screen material: 4-mm-thick transparent, tempered extra-clear glass, high-transmittance with grey-vitrified serigraphy (RAL 7015), to ensure chromatic uniformity and excellent resistance to knocks and scratches
Seals: the silicone rubber gaskets guarantee maximum resistance to UV rays and unchanging mechanical characteristics over time
built-in power supply unit
Ingress protection: IP65
Impact resistance: IK07
single-beam version available on request
Operating temperature: -20°C — +45°C
Glow wire test: 650°
Photobiological safety: in accordance with IEC TR 62778:2014
Appliance class: class II
Weight: 950 g
Dimensions: 120x220x48 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption
Mounting surface mounted (ceiling, wall)
Number and type of LED 24 mid-power LEDs, 2-step MacAdam, 50 000h L80 B10 (Ta 25°C)
LED colour 2200K, 2700K, 3000K, 4000K
Optics 42°x102°, 62°x100°, asymmetrical, diffuse
CRI Colour Rendering Index 80, >90
Body material body and cover in anticorodal aluminium
Screen material screen in serigraphed-grey and transparent, tempered extra-clear glass
Finishes cor-ten, anthracite, white, primer
Power supply unit built-in power supply unit
Ingress protection IP65
Impact resistance IK07
Notes single-beam version available on request
Status Available

Customize this product

This product can be customized, thanks to our flexible in-house production. We suggest some of the possible customized versions on the right, but if you have any different requirements, we can review them together.

Possible customizations:

  • Finish: black
  • Single beam