Pasito Mini 1.0

Step lights for outdoor applications

step light for outdoor applications - 6W 230Vac / 5W 24Vdc - 84x161 mm

Technical data

Required outer casing not included
  • CE mark for the European Union
  • UKCA mark for Great Britain
  • CB
  • EAC
  • BIS R-41105201
  • lighting fixture with LED technology
  • appliance class II
    230Vac
  • appliance class III
    24Vdc
  • gross weight
    kg 0,35 (230Vac), kg 0,30 (24Vdc)
  • IP65
  • IK05
  • IPS
  • RAL finish on request
  • Casambi control
  • F
Installation step light for outdoor applications
Power consumption 6W (230Vac), 5W (24Vdc)
Power supply 230Vac, 24Vdc
Lumen output at source 355 lm (3000K, CRI >90),
383 lm (3000K, CRI 80)
Delivered lumen output 170 lm (3000K, 60°, CRI >90, white finish),
186 lm (3000K, 150°x90° asymmetrical, CRI >90, white finish),
195 lm (3000K, 60°, CRI 80, white finish),
214 lm (3000K, 150°x90° asymmetrical, CRI 80, white finish)
Datasheet
Pasito Mini 1.0 step light for outdoor applications
recessed, flush (wall)
Power consumption: 6W (230Vac), 5W (24Vdc)
Power supply: 230Vac, 24Vdc
Lumen output at source: 355 lm (3000K, CRI >90), 383 lm (3000K, CRI 80)
Delivered lumen output: 170 lm (3000K, 60°, CRI >90, white finish), 186 lm (3000K, 150°x90° asymmetrical, CRI >90, white finish), 195 lm (3000K, 60°, CRI 80, white finish), 214 lm (3000K, 150°x90° asymmetrical, CRI 80, white finish)
1 power LED High Intensity, 1/4 ANSI BIN, 50 000h L90 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: 60°: optical system consisting of a 60° hemispherical lens, installed at an angle and set back in the chamber to to create a controlled downward light beam, reducing light spill to a minimum, asymmetrical 150°x90°: optical system consisting of an asymmetrical hemispherical lens, installed at an angle and set back in the chamber to to create a controlled downward light beam, reducing light spill to a minimum
Upward flux fraction: 15,83% (asymmetrical 150°x90°, white, grey finish), 1,65% (asymmetrical 150°x90°, cor-ten, anthracite finish), 11,25% (60°, white, grey finish), 3,59% (60°, cor-ten, anthracite finish)
CRI Colour Rendering Index: 80, >90
Body material: body made of ANTICORODAL 6060 low-copper-content aluminium alloy, made from an extruded profile, then anodized black to give the product better heat dissipation and increase its resistance to corrosion. Structured reflector made of extruded ANTICORODAL 6060 aluminium, painted in the same colour
Finishes: grey finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9006), white finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003), cor-ten finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, anthracite finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector
RAL finish on request
230Vac: power supply unit included, 24Vdc: power supply unit not included
230Vac version: includes 0.20 m neoprene cable, H05RN-F 2x1.00 Ø7 mm; 24Vdc version: includes 0.30 m neoprene cable, H05RN-F 2x0.35/0.75 Ø6.3 mm
Ingress protection: IP65
Impact resistance: IK05
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit
Operating temperature: -20°C — +45°C
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class II (230Vac), class III (24Vdc)
Weight: 350 g (230Vac), 300 g (24Vdc)
Dimensions: 84x67x161 mm
Cutout dimensions: 86x165 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WCA00E Outer casing - white, WCA00F Outer casing - grey, WCA00H Outer casing - anthracite, WCA00T Outer casing - cor-ten
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption
Mounting recessed, flush (wall)
Number and type of LED 1 power LED High Intensity, 1/4 ANSI BIN, 50 000h L90 B10 (Ta 25°C)
LED colour 2700K, 3000K, 4000K
Optics 60°, asymmetrical 150°x90°
CRI Colour Rendering Index 80, >90
Body material body in anticorodal aluminium
Finishes grey, white, cor-ten, anthracite
Power supply unit 230Vac: power supply unit included, 24Vdc: power supply unit not included
Power cables 230Vac version: includes 0.20 m neoprene cable, H05RN-F 2x1.00 Ø7 mm;
24Vdc version: includes 0.30 m neoprene cable, H05RN-F 2x0.35/0.75 Ø6.3 mm
Ingress protection IP65
Impact resistance IK05
Status Available