Lyss 2.0

Projectors for outdoor applications

19W 24Vdc - RGBW

Technical data

  • RGBW
  • complies with the European standard EN 60598-1
  • lighting fixture with LED technology
  • appliance class III
  • gross weight
    0.70 kg
  • IP65
  • IK06
  • PID
  • RAL finish on request
  • A/A+/A++
Installation projector for outdoor applications
Power 19W
Power supply 24Vdc
Lumen output at source 1024 lm, R: 124 lm G: 340 lm B: 120 lm W: 440 lm (4000K)
Delivered lumen output 256 lm, R: 31 lm G: 85 lm B: 30 lm W: 110 lm (4000K)
Datasheet
Lyss 2.0 projector for outdoor applications
surface mounted (windowsill, arch)
Power: 19W
Power supply: 24Vdc
Lumen output at source: 1024 lm, R: 124 lm G: 340 lm B: 120 lm W: 440 lm (4000K)
Delivered lumen output: 256 lm, R: 31 lm G: 85 lm B: 30 lm W: 110 lm (4000K)
4 RGBW LEDs groups, 50 000h L90 B10 (Ta 25°C)
LED colour: RGBW
Optics: 12°x160°: the optical system uses COLORSENSE technology: a set of optics that chromatically homogenizes the light from RGBW sources to produce a 12°x160° beam
Body material: body made of low-copper-content die-cast aluminium alloy EN AB 47100 for excellent resistance to corrosion
Finishes: cor-ten finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1000 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, white finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1000 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, anthracite finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1000 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, grey finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1000 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector
RAL finish on request
Screen material: screen made of polycarbonate with anti-UV coating, characterised by excellent resistance to impacts
power supply unit not included
includes 1.5 m FEP+RUB cable (equivalent to H05RN-F) 6x0.50/0.50 Ø6.3 mm
Ingress protection: IP65
Impact resistance: IK06
Protection systems: The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content
Operating temperature: -20°C — +45°C
Maximum device temperature: 45°C (Ta 25°C)
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: III
Weight: 700 g
Dimensions: 118x88x66 mm
Energy efficiency class: A / A+ / A++
Accessories: WC0301 Outer casing, WD0600E Connection housing - white, WD0600F Connection housing - grey, WD0600H Connection housing - anthracite, WD0600T Connection housing - cor-ten
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption
Mounting surface mounted (windowsill, arch)
Number and type of LED 4 RGBW LEDs groups, 50 000h L90 B10 (Ta 25°C)
LED colour RGBW
Optics 12°x160°
Body material body in die-cast aluminium
Screen material screen in polycarbonate
Finishes cor-ten, white, anthracite, grey
Power supply unit power supply unit not included
Power cables includes 1.5 m FEP+RUB cable (equivalent to H05RN-F) 6x0.50/0.50 Ø6.3 mm
Ingress protection IP65
Impact resistance IK06
Status Available