Smoothy. Outdoor recessed uplights for architectural lighting

Technical data

kg 1000 - kN 10
kg 0,30
IP67
IK08

Installation	recessed for outdoor applications
Power consumption	3,5W, 2,5W
Power supply	24Vdc
Lumen output at source	147 lm (3000K, 2.5W, CRI >90), 168 lm (3000K, 2.5W, CRI 80), 196 lm (3000K, 3.5W, CRI >90), 224 lm (3000K, 3.5W, CRI 80)
Delivered lumen output	125 lm (3000K, 22°, 2.5W, CRI >90), 141 lm (3000K, 22°, 2.5W, CRI 80), 165 lm (3000K, 22°, 3.5W, CRI >90), 188 lm (3000K, 22°, 3.5W, CRI 80)
Datasheet	Smoothy 2.8 recessed for outdoor applications; drive-over up to 1000 kg; recessed (ceiling, wall, floor); Power consumption: 3,5W, 2,5W; Power supply: 24Vdc; Lumen output at source: 147 lm (3000K, 2.5W, CRI >90), 168 lm (3000K, 2.5W, CRI 80), 196 lm (3000K, 3.5W, CRI >90), 224 lm (3000K, 3.5W, CRI 80); Delivered lumen output: 125 lm (3000K, 22°, 2.5W, CRI >90), 141 lm (3000K, 22°, 2.5W, CRI 80), 165 lm (3000K, 22°, 3.5W, CRI >90), 188 lm (3000K, 22°, 3.5W, CRI 80); 1 power LED, 1/4 ANSI BIN, 50 000h L90 B10 (Ta 25°C); LED colour: 2700K, 3000K, 4000K; Optics: 13° tiltable ±15°, 30° tiltable ±15°: optical system consisting of a high-efficiency TIR lens combined with a high-quality technical filter, 22° tiltable ±15°, 48° tiltable ±15°: optical system consisting of a high-efficiency TIR lens, sharp 35° tiltable ±15°: SHARP optical system consisting of a plano-convex lens for an extremely well-defined light beam, combined with a high-quality technical filter; CRI Colour Rendering Index: 80, >90; Body material: body made of ANTICORODAL 6082 aluminium alloy, made entirely on a CNC lathe and then electro-coloured black. Trim in AISI 316L stainless steel, made with a CNC lathe; RAL finish on request; Screen material: 8-mm-thick transparent extra-clear glass, high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches; Seals: the silicone rubber gaskets guarantee maximum resistance to UV rays and unchanging mechanical characteristics over time; Thickness of installation surface: min 0 mm, max 25 mm; power supply unit not included; includes 1,5 m neoprene cable, H05RN-F 2x0,75/0,75 Ø6,3 mm; Ingress protection: IP67; Impact resistance: IK08; version with honeycomb louvre available on request; Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; Operating temperature: -20°C — +45°C; Maximum device temperature: 50°C (Ta 25°C); Glow wire test: 960°; Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006; Appliance class: class III; Weight: 300 g; Dimensions: Ø84x75 mm; Cutout dimensions: Ø75 mm; Volume of thermal heatsink: Ø180x120 mm; Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012; Accessories: WC4020 Outer casing, WE0701S Anti-glare screen, half transparent and half serigraphed black, WG0502 Fixing springs Ø75mm, WL0100 Suction cup; tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumptionSmoothy 2.8 recessed for outdoor applications drive-over up to 1000 kg recessed (ceiling, wall, floor) Power consumption: 3,5W, 2,5W Power supply: 24Vdc Lumen output at source: 147 lm (3000K, 2.5W, CRI >90), 168 lm (3000K, 2.5W, CRI 80), 196 lm (3000K, 3.5W, CRI >90), 224 lm (3000K, 3.5W, CRI 80) Delivered lumen output: 125 lm (3000K, 22°, 2.5W, CRI >90), 141 lm (3000K, 22°, 2.5W, CRI 80), 165 lm (3000K, 22°, 3.5W, CRI >90), 188 lm (3000K, 22°, 3.5W, CRI 80) 1 power LED, 1/4 ANSI BIN, 50 000h L90 B10 (Ta 25°C) LED colour: 2700K, 3000K, 4000K Optics: 13° tiltable ±15°, 30° tiltable ±15°: optical system consisting of a high-efficiency TIR lens combined with a high-quality technical filter, 22° tiltable ±15°, 48° tiltable ±15°: optical system consisting of a high-efficiency TIR lens, sharp 35° tiltable ±15°: SHARP optical system consisting of a plano-convex lens for an extremely well-defined light beam, combined with a high-quality technical filter CRI Colour Rendering Index: 80, >90 Body material: body made of ANTICORODAL 6082 aluminium alloy, made entirely on a CNC lathe and then electro-coloured black. Trim in AISI 316L stainless steel, made with a CNC lathe RAL finish on request Screen material: 8-mm-thick transparent extra-clear glass, high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches Seals: the silicone rubber gaskets guarantee maximum resistance to UV rays and unchanging mechanical characteristics over time Thickness of installation surface: min 0 mm, max 25 mm power supply unit not included includes 1,5 m neoprene cable, H05RN-F 2x0,75/0,75 Ø6,3 mm Ingress protection: IP67 Impact resistance: IK08 version with honeycomb louvre available on request Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit Operating temperature: -20°C — +45°C Maximum device temperature: 50°C (Ta 25°C) Glow wire test: 960° Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006 Appliance class: class III Weight: 300 g Dimensions: Ø84x75 mm Cutout dimensions: Ø75 mm Volume of thermal heatsink: Ø180x120 mm Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012 Accessories: WC4020 Outer casing, WE0701S Anti-glare screen, half transparent and half serigraphed black, WG0502 Fixing springs Ø75mm, WL0100 Suction cup tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption Copied

Mounting	recessed (ceiling, wall, floor)
Number and type of LED	1 power LED, 1/4 ANSI BIN, 50 000h L90 B10 (Ta 25°C)
LED colour	2700K, 3000K, 4000K
Optics	13° tiltable ±15°, 22° tiltable ±15°, 30° tiltable ±15°, sharp 35° tiltable ±15°, 48° tiltable ±15°
CRI Colour Rendering Index	80, >90
Body material	body in black-anodized anticorodal aluminium, trim in AISI 316L stainless steel
Screen material	screen in tempered, transparent extra-clear glass
Power supply unit	power supply unit not included
Power cables	includes 1,5 m neoprene cable, H05RN-F 2x0,75/0,75 Ø6,3 mm
Ingress protection	IP67
Impact resistance	IK08
Notes	version with honeycomb louvre available on request
Status	Available

Close

Input

230Vac 50-60 Hz

Output

24Vdc; 16W
250mA constant current; max 13W

350mA constant current; max 19W

400mA constant current; max 20W

450mA constant current; max 20W

500mA constant current; max 20W

550mA constant current; max 20W

600mA constant current; max 20W

700mA constant current; max 20W

Dimmering

Cannot be dimmed

Power supply unit IP

IP20

Input

230Vac 50-60 Hz

Output

24Vdc; 20W
12Vdc; 10W

28Vdc; 22W

350mA constant current; max 17W

500mA constant current; max 24W

550mA constant current; max 25W

700mA constant current; max 32W

Dimmering

Cannot be dimmed

Power supply unit IP

IP20

Output

24Vdc; 16W
250mA constant current; max 10W

350mA constant current; max 15W

400mA constant current; max 17W

450mA constant current; max 19W

500mA constant current; max 20W

550mA constant current; max 20W

600mA constant current; max 20W

700mA constant current; max 20W

Dimmering

DALI, ON/OFF

Power supply unit IP

IP20

Input

230Vac 50-60 Hz

Output

24Vdc; 20W
12Vdc; 10W

28Vdc; 22W

350mA constant current; max 17W

500mA constant current; max 24W

550mA constant current; max 25W

700mA constant current; max 32W

750mA constant current; max 32W

Dimmering

PUSH, Mains dimming, ON/OFF

Power supply unit IP

IP20

Input

115-230Vac 50-60 Hz
230Vac 50-60 Hz

Output

24Vdc; 20W
12Vdc; 11W

250mA constant current; max 13W

300mA constant current; max 16W

350mA constant current; max 18W

400mA constant current; max 21W

450mA constant current; max 23W

500mA constant current; max 25W

550mA constant current; max 27W

600mA constant current; max 30W

650mA constant current; max 32W

700mA constant current; max 32W

750mA constant current; max 20W

800mA constant current; max 20W

850mA constant current; max 20W

900mA constant current; max 20W

Dimmering

1-10V, PUSH, ON/OFF

Power supply unit IP

IP20

Input

115-230Vac 50-60 Hz
230Vac 50-60 Hz

Output

24Vdc; 8W

Dimmering

ON/OFF

Power supply unit IP

IP54

Input

115-230Vac 50-60 Hz
230Vac 50-60 Hz

Output

24Vdc; 10W

Dimmering

ON/OFF

Power supply unit IP

IP20

Input

115-230Vac 50-60 Hz
230Vac 50-60 Hz

Output

24Vdc; 20W

Dimmering

ON/OFF

Power supply unit IP

IP67

Input

115-230Vac 50-60 Hz
230Vac 50-60 Hz

Output

24Vdc; 40W

Dimmering

ON/OFF

Power supply unit IP

IP67

Input

230Vac 50-60 Hz

Output

24Vdc; 60W

Dimmering

ON/OFF

Power supply unit IP

IP20

Input

115-230Vac 50-60 Hz
230Vac 50-60 Hz

Output

24Vdc; 60W

Dimmering

Cannot be dimmed

Power supply unit IP

IP67

Input

230Vac 50-60 Hz

Output

24Vdc; 100W

Dimmering

ON/OFF

Power supply unit IP

IP20

Input

230Vac 50-60 Hz

Output

24Vdc; 150W

Power

150W

Dimmering

ON/OFF

Power supply unit IP

IP20

Input

115-230Vac 50-60 Hz
230Vac 50-60 Hz

Output

24Vdc; 150W

Dimmering

ON/OFF

Power supply unit IP

IP67

Input

115-230Vac 50-60 Hz
230Vac 50-60 Hz

Output

24Vdc; 240W

Dimmering

ON/OFF

Power supply unit IP

IP67

Input

115-230Vac 50-60 Hz
230Vac 50-60 Hz

Output

24Vdc; 320W

Dimmering

ON/OFF

Power supply unit IP

IP67

Input

12-24-48Vdc

Output

With 24 Vdc input:; 24Vdc; 288W
With 12 Vdc input:; 12Vdc; 144W

With 48 Vdc input:; 48Vdc; 576W

Dimmering

1-10V, PUSH, DALI, 10kΩ potentiometer

Power supply unit IP

IP20

Smoothy 2.8

Generate code

Technical data

Read more

Close

Download

Gallery

Accessories and power supply units

Accessories (4)

Outer casings

WC4020

Outer casing

Fixing springs

WG0502

Fixing springs Ø75mm

Screens

Order together with the lighting fixture.

WE0701S

Anti-glare screen, half transparent and half serigraphed black

Various accessories

WL0100

Suction cup

Cables

Power supply units (16)

ACUNI020T1

ACUNI032T1

AD020DALIT1

AD032TLT1

ADUNITC

AV24008IP54

AV24010IP20

AV24020IP67

AV24040IP67

AV24060IP20

AV24060IP67

AV24100IP20

AV24150IP20

AV24150IP67

AV24240IP67

AV24320IP67

Control gear (1)

ADV576DALIN1

Control input (0)

Projects

Entertainment

L&L stand - Light+Building 2014

Versions

Smoothy 1.0

Smoothy 1.6

Smoothy 2.4

Smoothy 5.4

Smoothy 5.6