Ginko 1.0

Projectors for outdoor applications

projector for outdoor applications - 2.5W / 3.5W 24Vdc - Ø34x49 mm

Technical data

  • complies with the European standard EN 60598-1
  • lighting fixture with LED technology
  • appliance class III
  • gross weight
    kg 0,22 - 0,34
  • IP66
  • IP69K
  • IK07
  • IPS
  • PID
  • RAL finish on request
  • A/A+/A++
Installation projector for outdoor applications
Power consumption 2,5W, 3,5W
Power supply 24Vdc
Lumen output at source 147 lm (3000K, 2.5W, CRI >90),
168 lm (3000K, 2.5W, CRI 80),
196 lm (3000K, 3.5W, CRI >90),
224 lm (3000K, 3.5W, CRI 80)
Delivered lumen output 124 lm (3000K, 2.5W, 19°, CRI >90),
146 lm (3000K, 2.5W, 19°, CRI 80),
164 lm (3000K, 3.5W, 19°, CRI >90),
193 lm (3000K, 3.5W, 19°, CRI 80)
Datasheet
Ginko 1.0 projector for outdoor applications
Awards: Muuuz International Awards 2019
surface mounted (ceiling, wall, ground, spike)
Power consumption: 2,5W, 3,5W
Power supply: 24Vdc
Lumen output at source: 147 lm (3000K, 2.5W, CRI >90), 168 lm (3000K, 2.5W, CRI 80), 196 lm (3000K, 3.5W, CRI >90), 224 lm (3000K, 3.5W, CRI 80)
Delivered lumen output: 124 lm (3000K, 2.5W, 19°, CRI >90), 146 lm (3000K, 2.5W, 19°, CRI 80), 164 lm (3000K, 3.5W, 19°, CRI >90), 193 lm (3000K, 3.5W, 19°, CRI 80)
1 power LED, 1/4 ANSI BIN, 50 000h L90 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: 12°, 19°, 36°, 58°: optical system consisting of a high-efficiency TIR lens combined with a high-quality technical filter, sharp 38°: SHARP optical system consisting of a plano-convex lens for an extremely well-defined light beam, combined with a high-quality technical filter, 16°x36°, 36°x16°: optical system consisting of a high-efficiency TIR lens
CRI Colour Rendering Index: 80, >90
Body material: body made of ANTICORODAL 6082 low-copper-content aluminium alloy for excellent resistance to corrosion, made entirely on a CNC lathe. Bracket in AISI 316L stainless steel, tumble finished and painted (painted version), body and bracket made of AISI 316L stainless steel, made entirely on a CNC lathe and then tumble finished (stainless steel version), body made of ANTICORODAL 6082 low-copper-content aluminium alloy for excellent resistance to corrosion, made entirely on a CNC lathe. Bracket in AISI 316L stainless steel, tumble finished (black-anodized version)
Finishes: jasper green finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, white finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003), grey finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9006), anthracite finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, finish that provides corrosion resistance of more than 3000 hours of salt spray, making it possible to use the product even in extremely severe atmospheric conditions, black finish obtained by electro-colouring, which offers the product better heat dissipation and provides corrosion resistance of more than 1500 hours of salt spray, cor-ten finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector
RAL finish on request
Screen material: 4-mm-thick transparent extra-clear glass with vitrified serigraphy, high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches
power supply unit not included
includes 1,5 m neoprene cable, H05RN-F 2x0,75/0,75 Ø6,3 mm
Ingress protection: IP66, IP69K
Impact resistance: IK07
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content
Operating temperature: -20°C — +45°C
Maximum device temperature: 50°C (Ta 25°C)
Glow wire test: 960°
Photobiological safety: in accordance with IEC TR 62778:2014
Appliance class: class III
Weight: 220 g, stainless steel: 335 g
Dimensions: Ø34x49 mm
Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012
Accessories: WB80115 Standard snoot - jasper green, WB8011E Standard snoot - white, WB8011F Standard snoot - grey, WB8011H Standard snoot - anthracite, WB8011N Standard snoot - black anodized, WB8011T Standard snoot - cor-ten, WB80215 Asymmetrical snoot - jasper green, WB8021E Asymmetrical snoot - white, WB8021F Asymmetrical snoot - grey, WB8021H Asymmetrical snoot - anthracite, WB8021N Asymmetrical snoot - black anodized, WB8021T Asymmetrical snoot - cor-ten, WF3302 Flexible cable-protection tube - 18 cm, WH8001 Honeycomb louvre , WP0100 Spike for in-ground installation, WP1004 Fastener strap - 5 m
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption
Mounting surface mounted (ceiling, wall, ground, spike)
Number and type of LED 1 power LED, 1/4 ANSI BIN, 50 000h L90 B10 (Ta 25°C)
LED colour 2700K, 3000K, 4000K
Optics 12°, 19°, 36°, sharp 38°, 58°, 16°x36°, 36°x16°
CRI Colour Rendering Index 80, >90
Body material body in anticorodal aluminium, AISI 316L stainless steel bracket,
body in AISI 316L stainless steel, AISI 316L stainless steel bracket
Screen material screen in serigraphed, transparent and tempered extra-clear glass
Finishes jasper green, white, grey, anthracite, stainless steel, anodized black, cor-ten
Power supply unit power supply unit not included
Power cables includes 1,5 m neoprene cable, H05RN-F 2x0,75/0,75 Ø6,3 mm
Ingress protection IP66, IP69K
Impact resistance IK07
Status Available