Ginko 3.3

Projectors for outdoor applications

projector for outdoor applications - 11W 24Vdc  - ø84x88 mm - RGBW

Technical data

  • RGBW
  • CE mark for the European Union
  • UKCA mark for Great Britain
  • EAC
  • lighting fixture with LED technology
  • appliance class III
  • gross weight
    kg 1,35 - 2,50
  • IP66
  • IP69
  • IK09
  • IPS
  • RAL finish on request
  • Casambi control
  • F
Installation projector for outdoor applications
Power consumption 11W
Power supply 24Vdc
Lumen output at source 447 lm, R: 68 lm G: 139 lm B: 51 lm W: 189 lm (4000K)
Delivered lumen output 272 lm, R: 41 lm G: 85 lm B: 31 lm W: 115 lm (4000K, 19°)
Datasheet
Ginko 3.3 projector for outdoor applications
surface mounted (ceiling, wall, ground, spike)
Power consumption: 11W
Power supply: 24Vdc
Lumen output at source: 447 lm, R: 68 lm G: 139 lm B: 51 lm W: 189 lm (4000K)
Delivered lumen output: 272 lm, R: 41 lm G: 85 lm B: 31 lm W: 115 lm (4000K, 19°)
1 group of 4 power LEDs, 50 000h L85 B10 (Ta 25°C)
LED colour: RGBW
Optics: 19°, 33°, 56°: optical system consisting of 4 high-efficiency TIR microlenses combined with a high-quality technical filter, adjustable 32°x73°: optical system made up of 4 high-efficiency TIR microlenses combined with high-quality technical filters
Body material: body made of ANTICORODAL 6082 low-copper-content aluminium alloy for excellent resistance to corrosion, made entirely on a CNC lathe. Bracket in AISI 316L stainless steel, tumble finished and painted (painted version), body made of ANTICORODAL 6082 low-copper-content aluminium alloy for excellent resistance to corrosion, made entirely on a CNC lathe. Bracket in AISI 316L stainless steel, tumble finished (black-anodized version), body and bracket made of AISI 316L stainless steel, made entirely on a CNC lathe and then tumble finished (stainless steel version)
Finishes: jasper green finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, black finish obtained by electro-colouring, which offers the product better heat dissipation and provides corrosion resistance of more than 1500 hours of salt spray, anthracite finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, grey finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9006), finish that provides corrosion resistance of more than 3000 hours of salt spray, making it possible to use the product even in extremely severe atmospheric conditions, white finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003), cor-ten finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector
RAL finish on request
Screen material: 4-mm-thick transparent extra-clear glass, with high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches, with RAL 7015 grey vitrified serigraphy around the edge
power supply unit not included
includes 1.50/5 m FEP+RUB cable (equivalent to H05RN-F) 6x0.50/0.50 Ø6.3 mm
Ingress protection: IP66, IP69
Impact resistance: IK09
32°x73° optics adjustable through 360° using the magnet provided
version with bracket in customized height available on request
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit
Operating temperature: -20°C — +45°C
Maximum device temperature: 45°C (Ta 25°C)
Glow wire test: 650°
Photobiological safety: in accordance with IEC TR 62778:2014
Appliance class: class III
Weight: 1350 g, stainless steel: 2500 g
Dimensions: Ø84x88 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WB80105 Standard snoot - jasper green, WB8010E Standard snoot - white, WB8010F Standard snoot - grey, WB8010H Standard snoot - anthracite, WB8010N Standard snoot - black anodized, WB8010T Standard snoot - cor-ten, WB80205 Asymmetrical snoot - jasper green, WB8020E Asymmetrical snoot - white, WB8020F Asymmetrical snoot - grey, WB8020H Asymmetrical snoot - anthracite, WB8020T Asymmetrical snoot - cor-ten, WE0201 Magnet for adjustable optics and zoom lens, WP0100 Spike for in-ground installation, WP1004 Fastener strap - 5 m, WP10065 Spike for in-ground installation - h 500 mm - jasper green, WP1006E Spike for in-ground installation - h 500 mm - white, WP1006F Spike for in-ground installation - h 500 mm - grey, WP1006H Spike for in-ground installation - h 500 mm - anthracite, WP1006I Spike for in-ground installation - h 500 mm - stainless steel, WP1006T Spike for in-ground installation - h 500 mm - cor-ten, WP10075 Spike for in-ground installation - h 800 mm - jasper green, WP1007E Spike for in-ground installation - h 800 mm - white, WP1007F Spike for in-ground installation - h 800 mm - grey, WP1007H Spike for in-ground installation - h 800 mm - anthracite, WP1007I Spike for in-ground installation - h 800 mm - stainless steel, WP1007T Spike for in-ground installation - h 800 mm - cor-ten
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption
Mounting surface mounted (ceiling, wall, ground, spike)
Number and type of LED 1 group of 4 power LEDs, 50 000h L85 B10 (Ta 25°C)
LED colour RGBW
Optics 19°, 33°, 56°, adjustable 32°x73°
Body material body in anticorodal aluminium, AISI 316L stainless steel bracket,
body in AISI 316L stainless steel, AISI 316L stainless steel bracket
Screen material screen in serigraphed-grey and transparent, tempered extra-clear glass
Finishes jasper green, anodized black, anthracite, grey, stainless steel, white, cor-ten
Power supply unit power supply unit not included
Power cables includes 1.50/5 m FEP+RUB cable (equivalent to H05RN-F) 6x0.50/0.50 Ø6.3 mm
Ingress protection IP66, IP69
Impact resistance IK09
Features 32°x73° optics adjustable through 360° using the magnet provided
Notes version with bracket in customized height available on request
Status Available