Bright 2.8

Recessed for outdoor applications

recessed for outdoor applications - 2,5W/3,5W 24Vdc - tiltable optics ±15° - ø85 mm

Technical data

Updated to CB280105LI

  • CE mark for the European Union
  • UKCA mark for Great Britain
  • CB
  • EAC
  • BIS R-41105201
  • lighting fixture with LED technology
  • appliance class III
  • drive-over fixture
    kg 2000 - kN 20
  • gross weight
    kg 0,40 - kg 0,50
  • IP65
  • IP68
  • IP69
  • IK10
  • IPS
  • Casambi control
  • maximum device temperature55°C
  • F
Installation recessed for outdoor applications (not suitable for use in swimming pools or fountains)
Power consumption 3,5W
Power supply 24Vdc
Lumen output at source 184 lm (3000K, 3.5W)
Delivered lumen output 143 lm (3000K, 20°, 3.5W)
Datasheet
Bright 2.8 code: CB280105LI recessed for outdoor applications (not suitable for use in swimming pools or fountains)
drive-over up to 2000 kg
recessed (ceiling, wall, floor)
Power consumption: 3,5W
Power supply: 24Vdc
Lumen output at source: 184 lm (3000K, 3.5W)
Delivered lumen output: 143 lm (3000K, 20°, 3.5W)
1 power LED, 1/4 ANSI BIN, 50 000h L90 B10 (Ta 25°C)
LED colour: 3000K
Optics: 41° tiltable ±15°
CRI Colour Rendering Index: 80
Body material: body in black-anodized anticorodal aluminium, trim in AISI 316L stainless steel
Finishes: stainless steel
Screen material: screen in tempered, transparent extra-clear glass
Thickness of installation surface: min 0 mm, max 25 mm
power supply unit not included
includes 1.5 m neoprene cable H05RN-F 2x0.75/0.75 Ø6.3 mm
Ingress protection: IP65, IP68, IP69
Impact resistance: IK10
version with LED colour 2200K and honeycomb louvre available on request; Casambi control using the Casambi app with dedicated electronics
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit
Operating temperature: -20°C — +45°C
Maximum device temperature: 55°C (Ta 25°C)
Glow wire test: 960°
Photobiological safety: in accordance with IEC TR 62778:2014
Appliance class: class III
Weight: stainless steel trim: 500 g, aluminium trim: 400 g
Dimensions: Ø85x66 mm
Cutout dimensions: Ø70 mm
Volume of thermal heatsink: Ø180x120 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WC0100 Outer casing, WC0103 Outer casing, WC0150 Outer casing, WE0400S Anti-glare screen, half transparent and half serigraphed black, WG0100 Retaining spring clip Ø70mm
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption
Mounting recessed (ceiling, wall, floor)
Number and type of LED 1 power LED, 1/4 ANSI BIN, 50 000h L90 B10 (Ta 25°C)
LED colour 3000K
Optics 41° tiltable ±15°
CRI Colour Rendering Index 80
Body material body in black-anodized anticorodal aluminium, trim in AISI 316L stainless steel
Screen material screen in transparent, tempered extra-clear glass
Finishes stainless steel
Power supply unit power supply unit not included
Power cables includes 1.5 m neoprene cable H05RN-F 2x0.75/0.75 Ø6.3 mm
Ingress protection IP65, IP68, IP69
Impact resistance IK10
Notes version with LED colour 2200K and honeycomb louvre available on request
Status Available

Customize this product

This product can be customized, thanks to our flexible in-house production. We suggest some of the possible customized versions on the right, but if you have any different requirements, we can review them together.

Possible customizations:

  • Finishes: anthracite, white, bronze, cor-ten, black
  • Constant current supply
  • 2200K LED colour