Bright 2.4

Recessed for outdoor applications

5W/7W 24Vdc; RGB: max 5W max 500mA - fixed optics - ø85 mm

Technical data

Updated to CB24010FTII

  • complies with the European standard EN 60598-1
  • lighting fixture with LED technology
  • appliance class III
  • drive-over fixture
    kg 2000
  • gross weight
    kg 0,44 AI - kg 0,33 A
  • IP68
  • IP69K
  • IK10
  • IPS
  • PID
  • T max 55°C
  • A/A+/A++
Installation recessed for outdoor applications (not suitable for use in swimming pools or fountains)
Power 7W
Power supply 24Vdc
Lumen output at source 657 lm (3000K, 7W, CRI 80)
Delivered lumen output 463 lm (3000K, 34°, 7W, CRI 80)
Datasheet
Bright 2.4 code: CB24010FTII recessed for outdoor applications (not suitable for use in swimming pools or fountains)
drive-over up to 2000 kg
recessed (ceiling, wall, floor)
Power: 7W
Power supply: 24Vdc
Lumen output at source: 657 lm (3000K, 7W, CRI 80)
Delivered lumen output: 463 lm (3000K, 34°, 7W, CRI 80)
1 high-intensity power LED, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C)
LED colour: 2700K
Optics: 11°
CRI: 80
Body material: body and trim in AISI 316L stainless steel
Finishes: stainless steel
Body: stainless steel
Screen material: 12-mm-thick transparent extra-clear glass, tempered for excellent resistance to knocks and scratches. Mixing chamber to ensure the light's chromatic uniformity
Thickness of installation surface: min 0 mm, max 25 mm
power supply unit not included
includes 1.5 m neoprene cable H05RN-F 2x0.75/0.75 Ø6.3 mm
Ingress protection: IP68, IP69K
Impact resistance: IK10
version with 5° optics (with white LED colour and 3,5W power) available on request; version with 9W power (with white LED colour) available on request
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content
Operating temperature: -20°C — +45°C
Maximum device temperature: 55°C (Ta 25°C)
Glow wire test: 960°
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: III
Weight: stainless steel trim: 440 g, aluminium trim: 330 g
Dimensions: Ø85x63 mm
Energy efficiency class: A / A+ / A++
Accessories: WC0100 Outer casing, WC0103 Outer casing, WC0150 Outer casing, WE0400A Semi-diffusing screen, half transparent and half frosted, WE0400S Anti-glare screen, half transparent and half serigraphed black, WF8605 Neoprene cable - 5 m  H05RN-F 2x0,75/0,75 Ø6,3 mm - IPS, WF8610 Neoprene cable - 10 m  H05RN-F 2x0,75/0,75 Ø6,3 mm - IPS, WF8615 Neoprene cable - 15 m  H05RN-F 2x0,75/0,75 Ø6,3 mm - IPS, WF8620 Neoprene cable - 20 m  H05RN-F 2x0,75/0,75 Ø6,3 mm - IPS, WG0100 Fixing springs Ø70mm, WH0201 Honeycomb louvre 
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption
Mounting recessed (ceiling, wall, floor)
Number and type of LED 1 high-intensity power LED, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C)
LED colour 2700K
Optics 11°
CRI 80
Body material body and trim in AISI 316L stainless steel
Screen material screen in tempered, transparent extra-clear glass
Finishes stainless steel
Body stainless steel
Power supply unit power supply unit not included
Power cables includes 1.5 m neoprene cable H05RN-F 2x0.75/0.75 Ø6.3 mm
Ingress protection IP68, IP69K
Impact resistance IK10
Notes version with 5° optics (with white LED colour and 3,5W power) available on request;
version with 9W power (with white LED colour) available on request
Status Available