Kleo 1.1

Projectors for outdoor applications

projector for outdoor applications - 10W 230Vac - adjustable 220° and 350° - CRI 80 and CRI >90

Technical data

  • complies with the European standard EN 60598-1
  • lighting fixture with LED technology
  • gross weight
    kg 2,60
  • IP66
  • IK07
  • IPS
  • SPD
  • RAL finish on request
  • A/A+/A++
Installation projector for outdoor applications
Power consumption 10W
Power supply 230Vac
Lumen output at source 815 lm (3000K, CRI >90),
945 lm (3000K, CRI 80)
Delivered lumen output 289 lm (3000K, 16° sharp, CRI >90),
340 lm (3000K, 16° sharp, CRI 80),
544 lm (3000K, 30°, CRI >90),
640 lm (3000K, 30°, CRI 80)
Datasheet
Kleo 1.1 projector for outdoor applications
surface mounted (ceiling, wall, floor)
Power consumption: 10W
Power supply: 230Vac
Lumen output at source: 815 lm (3000K, CRI >90), 945 lm (3000K, CRI 80)
Delivered lumen output: 289 lm (3000K, 16° sharp, CRI >90), 340 lm (3000K, 16° sharp, CRI 80), 544 lm (3000K, 30°, CRI >90), 640 lm (3000K, 30°, CRI 80)
1 COB LED, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: 16°, sharp 16°, 30°, 63°
CRI Colour Rendering Index: 80, >90
Body material: body in aluminium
Finishes: white (RAL 9003), grey (RAL 9006), anthracite, cor-ten
RAL finish on request
Screen material: screen in serigraphed, transparent and tempered extra-clear glass
built-in power supply unit
includes 1,5 m neoprene cable, H05RN-F 3x1,0 Ø7 mm
Ingress protection: IP66
Impact resistance: IK07
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The SPD (Surge Protection Device) protects lighting fixtures from electrical phenomena external to the system, such as power surges. In particular, this device is specifically for protection against serious events with a high energy content
Operating temperature: -20°C — +45°C
Maximum device temperature: 50°C (Ta 25°C)
Glow wire test: 960°
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class I
Weight: 2600 g
Dimensions: Ø109x130x200 mm
Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012
Accessories: WB1101E Standard snoot - white, WB1101F Standard snoot - grey, WB1101H Standard snoot - anthracite, WB1101T Standard snoot - cor-ten, WB1102E Asymmetrical snoot - white, WB1102F Asymmetrical snoot - grey, WB1102H Asymmetrical snoot - anthracite, WB1102T Asymmetrical snoot - cor-ten, WB1103N Barn doors - black, WH0505 Honeycomb louvre 
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption
Mounting surface mounted (ceiling, wall, floor)
Number and type of LED 1 COB LED, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C)
LED colour 2700K, 3000K, 4000K
Optics 16°, sharp 16°, 30°, 63°
CRI Colour Rendering Index 80, >90
Body material body in aluminium
Screen material screen in serigraphed, transparent and tempered extra-clear glass
Finishes white, grey, anthracite, cor-ten
Power supply unit built-in power supply unit
Power cables includes 1,5 m neoprene cable, H05RN-F 3x1,0 Ø7 mm
Ingress protection IP66
Impact resistance IK07
Status Available