Rio 1.4

Linear profiles for outdoor applications

linear profile for outdoor applications - 24W 24Vdc, RGB: 34W 24Vdc - 2010 mm - transitable - RGB

Technical data

Updated to RE14005DB

  • CE mark for the European Union
  • UKCA mark for Great Britain
  • CB
  • EAC
  • BIS R-41103985
  • lighting fixture with LED technology
  • appliance class III
  • drive-over fixture
    kg 5000 - kN 50
  • gross weight
    kg 1,50
  • IP67
  • IK10
  • IPS
  • Casambi control
  • maximum device temperature40°C
  • F
Installation linear profile for outdoor applications
Power consumption 24W
Power supply 24Vdc
Lumen output at source 2688 lm (2800K)
Delivered lumen output 560 lm (2800K)
Datasheet
Rio 1.4 code: RE14005DB linear profile for outdoor applications
drive-over up to 5000 kg
recessed (ceiling, wall, floor)
Power consumption: 24W
Power supply: 24Vdc
Lumen output at source: 2688 lm (2800K)
Delivered lumen output: 560 lm (2800K)
192 low-power SMD LEDs, 3-step MacAdam, 50 000h L95 B10 (Ta 25°C)
LED colour: 2800K
Optics: diffuse: optical system consisting of light sources placed in a line on a rigid electronic circuit
CRI Colour Rendering Index: 80
Body material: body and screen made of co-extruded opal PMMA to provide high strength combined with high aesthetics. Caps in AISI 316L stainless steel and screws in A4 stainless steel
Seals: silicone rubber O-rings with anti-ageing treatment for an excellent mechanical seal
power supply unit not included
includes 1.5 m neoprene cable, H05RN-F 2x0,35/0,75 Ø6,3 mm
Ingress protection: IP67
Impact resistance: IK10
drive-over up to 5000 kg with aluminium casing, drive-over up to 500 kg with stainless steel casing. Non-standard lengths available on request; Casambi control using the Casambi app with dedicated electronics
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit
Operating temperature: -20°C — +45°C
Maximum device temperature: 40°C (Ta 25°C)
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class III
Weight: 1500 g
Dimensions: 2010x20x43 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WC8114 Aluminium outer casing - 2015 mm, WC8154 Stainless steel outer casing - 2014 mm, WC8314 Aluminium outer casing for plasterboard - 2015 mm, WN6005 Alignment kit for outer casing, WN6006 Pair of extractors for outer casings, WN8003 U-shaped brackets pair, WN8011 Alignment kit for stainless steel outer casings, WN8101 Anti-fall kit
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption
Mounting recessed (ceiling, wall, floor)
Number and type of LED 192 low-power SMD LEDs, 3-step MacAdam, 50 000h L95 B10 (Ta 25°C)
LED colour 2800K
Optics diffuse
CRI Colour Rendering Index 80
Body material body in PMMA, screen in opal PMMA, end caps in AISI 316L stainless steel
Power supply unit power supply unit not included
Power cables includes 1.5 m neoprene cable, H05RN-F 2x0,35/0,75 Ø6,3 mm
Ingress protection IP67
Impact resistance IK10
Notes drive-over up to 5000 kg with aluminium casing, drive-over up to 500 kg with stainless steel casing. Non-standard lengths available on request
Status Available

Customize this product

This product can be customized, thanks to our flexible in-house production. We suggest some of the possible customized versions on the right, but if you have any different requirements, we can review them together.

Possible customizations:

  • Non-standard lengths