Siri 2.2
projector for outdoor applications
surface mounted (ceiling, wall, ground, spike)
Power consumption: 20W
Power supply: 24Vdc
Lumen output at source: 1059 lm, R: 165 lm G: 293 lm B: 118 lm W: 483 lm (4000K)
Delivered lumen output: 756 lm, R: 118 m G: 209 lm B: 84 lm W: 345 lm (4000K, 32°)
4 RGBW power LED groups, 50 000h L90 B10 (Ta 25°C)
LED colour: RGBW
Optics: 21°, 32°, 58°, 30°x60°, 60°x30°: optical system consisting of a high-efficiency TIR lens combined with a high-quality technical filter
Body material: body made of low-copper-content die-cast aluminium alloy EN AB 47100 for excellent resistance to corrosion
Finishes: grey finish obtained through an  initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9006), anthracite finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, cor-ten finish obtained through an  initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, white finish obtained through an  initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003)
RAL finish on request
Screen material: 4-mm-thick transparent extra-clear glass with vitrified serigraphy, high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches
power supply unit not included
includes 1,5 m FEP+RUB cable (equivalent to H05RN-F cable), 4x0,50/0,50 Ø6,3 mm
Ingress protection: IP66
Impact resistance: IK06
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit
Operating temperature: -20°C — +45°C
Glow wire test: 960°
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class III
Weight: 1420 g
Dimensions: 254x123x58 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WB5020H Anti-glare hood - anthracite, WP0300 Spike for in-ground installation
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption