Rondò 3.2 code: RD32009AH step light for outdoor applications, double beam drive-over up to 5000 kg recessed (floor) Power consumption: 5W Power supply: 24Vdc Lumen output at source: 370 lm (3000K) Delivered lumen output: 180 lm (3000K, radial optics) 2 power LEDs, 1/4 ANSI BIN, 50 000h L95 B10 (Ta 25°C) LED colour: 4000K Optics: radial: optical system consisting of a high-efficiency TIR lens Upward flux fraction: 38,18% (radial optics), 21,13% (10°) CRI Colour Rendering Index: 80 Body material: body made of micro-cast AISI 316L stainless steel, produced entirely on a CNC lathe Finishes: anthracite finish obtained through micro-shot peening, an electrolytic passivation treatment and electropolishing; then painted through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint, to provide corrosion resistance of more than 1000 hours of salt spray testing. Paints compliant with the Qualicoat standard used in the automotive sector RAL finish on request Screen material: Rilsan® Clear protective screen in clear PA12 polyamide with high mechanical and optical performance Seals: O-ring in 4-mm expanded silicone power supply unit not included includes 1.5 m neoprene cable, H05RN-F 2x0,35/0,75 Ø6,3 mm Ingress protection: IP67 Impact resistance: IK08 Casambi control using the Casambi app with dedicated electronics Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content Operating temperature: -20°C — +45°C Maximum device temperature: 45°C (Ta 25°C) Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006 Appliance class: class III Weight: 1800 g Dimensions: Ø160x87 mm Energy efficiency class: F (light source) in accordance with EU 2019/2015 Accessories: WC0601 Outer casing, WC0701 Outer casing, WE0100 Tool for tamper-resistant screws tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption