Do 1
bollard for outdoor applications
surface mounted (ground, spike)
Power consumption: 0,9W
Power supply: 24Vdc
Lumen output at source: 133 lm (3000K)
Delivered lumen output: 81 lm (3000K)
8 mid-power LED matrix, 3-step MacAdam, 72 000h L80 B10 (Ta 25°C)
LED colour: 2200K, 2700K, 3000K, 4000K
Optics: diffuse
CRI Colour Rendering Index: 80
Body material: Body and bracket made of AISI 316L stainless steel, made entirely on a CNC lathe and then tumble finished and painted, Body and bracket made of AISI 316L stainless steel, made entirely on a CNC lathe and then micro-peened and electropolished
Finishes: anthracite finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, cor-ten finish obtained through an  initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, white finish obtained through an  initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003), stainless steel finish obtained through AC19 homologated treatment of micro-shot peening, an electrolytic passivation treatment and electropolishing, jasper green finish obtained through an  initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector
Screen material: screen in PMMA
Seals: The NBR nitrile rubber O-rings ensure the fixture’s IP rating is preserved, guaranteeing continued protection
Height: 500 mm, 1100 mm, 800 mm
power supply unit not included
includes 1.50/5/10 m neoprene cable, 05RN-F 2x0.35 Ø4.65 mm
Ingress protection: IP66
Impact resistance: IK06
Operating temperature: -20°C — +50°C
Photobiological safety: in accordance with IEC TR 62778:2014
Appliance class: class III
Weight: 257, 304, 350 g
Dimensions: Ø45x539 | Ø45x839 | Ø45x1139 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WDA335 Fixing base, WDA33E Fixing base, WDA33H Fixing base, WDA33I Fixing base, WDA33T Fixing base, WPA19 Spike for in-ground installation
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption