Colorado 3.1
linear profile for outdoor applications
surface mounted (ceiling, wall, floor)
Power consumption: 62W
Power supply: 230Vac
Lumen output at source: 7425 lm (3000K)
Delivered lumen output: 5645 lm (3000K, 12°)
27 high power LEDs pitch 33.3 mm, 2-step MacAdam, 60000h L80 B10 (Ta 25°C)  2200K: 3-step MacAdam, 60000h L80 B10 (Ta 25°C)
LED colour: 2200K, 2700K, 3000K, 4000K
Optics: 12°, 30°, 45°, 76°: optical system composed of a series of equidistant light sources, 20,83 mm apart. The deep-set PMMA TIR lens guarantees high-quality light emission and visual comfort, 15°x50°: optical system composed of a series of equidistant light sources, 20,83 mm apart. The deep-set elliptical PMMA TIR lens guarantees high-quality light emission and visual comfort, diffuse: optical system composed of a series of light sources. The PMMA TIR lens guarantees high-quality light emission and visual comfort
CRI Colour Rendering Index: 80
Body material: body made of Anticorodal® low-copper-content aluminium EN AW 6060 T5 for excellent heat dissipation, manufactured from an extruded profile and painted black (RAL 9005 matt) for excellent corrosion resistance. Caps made of black-painted (RAL 9005 matt) technopolymer for greater resistance to corrosion and atmospheric agents. AISI 304 stainless steel bracket painted matt RAL 9005 black with epoxy paint. Bushings in AISI 316L stainless steel, made with a CNC lathe
Finishes: black finish (RAL 9005 matt) obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1000 hours of salt spray (RAL 9005)
RAL finish on request
Screen material: 6-mm-thick transparent, tempered extra-clear glass, high-transmittance with grey-vitrified serigraphy (RAL 7015), to ensure chromatic uniformity and excellent resistance to knocks and scratches, 6-mm-thick acid-etched, tempered extra-clear glass, with grey-vitrified serigraphy (RAL 7015) resistant to knocks and scratches, and with high transmittance to eliminate chromatic aberrations (diffuse version)
Seals: Black peroxide EPDM O-rings guarantee lasting resistance to UV rays
Installation: On/off version: one IP68 4-way connector for power supply. Dimmable version: an IP68 4-way connector for power supply and an IP68 5-way connector for DALI and 0/1–10V signal
built-in power supply unit
Control system: DALI-2, 0/1-10V, ON/OFF
Ingress protection: IP65, IP67, IP69
Impact resistance: IK09
optical accessories of honeycomb louvre and anti-glare shield built into the lighting fixture, two brackets with two pivot points for accurate adjustment
Casambi-compatible version, controllable with the Casambi app, available on request
Protection systems: The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content
Operating temperature: -20°C — +45°C
Glow wire test: 650°
Photobiological safety: in accordance with IEC TR 62778:2014
Appliance class: class II
Weight: 8300 g
Dimensions: 925x73x173 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: honeycomb louvre, anti-glare shield, WFA0005 5-m 4-pin interconnect cable, WFA01 4-pin male connector, WFA0101 1.5-m 4-pin interconnect cable, WFA0201 1.5-m 5-pin interconnect cable, WFA0205 5-m 5-pin interconnect cable, WFA05 5-pin male connector, WMA04N brackets adjustable from 0 to 150 mm
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption