Smoothy 2.4
recessed for outdoor applications
drive-over up to 1000 kg
recessed (ceiling, wall, floor)
Power consumption: 3.5W (5° optics), 5W, 7W; RGB: max 7W
Power supply: 24Vdc; RGB: max 700mA
Lumen output at source: 226 lm (3000K, 3.5W, CRI 90), 245 lm (3000K, 3.5W, CRI 80), 452 lm (3000K, 5W, CRI >90), 488 lm (3000K, 5W, CRI 80), 608 lm (3000K, 7W, CRI >90), 657 lm (3000K, 7W, CRI 80), RGB: 311 lm, R: 108 lm G: 133 lm B: 70 lm (700mA)
Delivered lumen output: 164 lm (3000K, 5°, 3.5W, CRI 90), 177 lm (3000K, 5°, 3.5W, CRI 80), 327 lm (3000K, 34°, 5W, CRI >90), 352 lm (3000K, 34°, 5W, CRI 80), 374 lm (3000K, 34°, 7W, CRI >90), 463 lm (3000K, 34°, 7W, CRI 80), RGB: 253 lm, R: 98 lm G: 114 lm B: 41 lm (700mA, 34°)
1 high-intensity power LED, 3-step MacAdam;  RGB: 3 power LEDs 50 000h L90 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K, RGB
Optics: 5°, 8°, 17°, 13°x52°: optical system consisting of a high-efficiency TIR lens combined with a high-quality technical filter, 5°, 8°, 11°, 17°, 20°, sharp 21°, 34°, 45°, sharp 61°, 13°x52°, 21°x42°, 11°, 34°, 45°: optical system consisting of a high-efficiency TIR lens, 20°, 34°, 21°x42°: optical system consisting of 3 high-efficiency TIR microlenses (RGB), sharp 21°, sharp 61°: SHARP optical system consisting of a plano-convex lens for an extremely well-defined light beam, 45°: optical system consisting of a high-efficiency TIR lens combined with a high-quality technical filter (RGB), diffuse: optical system consisting of 4-mm-thick, transparent, tempered extra-clear glass seal, resistant to knocks and scratches, and with high transmittance to eliminate chromatic aberrations, combined with a technical filter in MCPET and a 3-mm-thick disc in PMMA with a satin surface on both sides
CRI Colour Rendering Index: 80, >90
Body material: body made of ANTICORODAL 6082 aluminium alloy, made entirely on a CNC lathe and then electro-coloured black. Trim in AISI 316L stainless steel, made with a CNC lathe, body made of ANTICORODAL 6082 aluminium alloy, made entirely on a CNC lathe and then electro-coloured black. Trim in brass, made with a CNC lathe
Finishes: stainless steel, brass
RAL finish on request
Screen material: 8-mm-thick transparent extra-clear glass, high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches (optics version), 4-mm-thick transparent extra-clear glass, high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches (diffuse version)
Seals: the silicone rubber gaskets guarantee maximum resistance to UV rays and unchanging mechanical characteristics over time
Thickness of installation surface: min 0 mm, max 25 mm
power supply unit not included
Wiring: parallel; RGB: series
includes 1,5 m neoprene cable, H05RN-F 2x0,75/0,75 Ø6,3 mm;  RGB: includes 1,5 m FEP+RUB cable (equivalent to H05RN-F cable) 6x0,50/0,50 Ø6,3 mm
Ingress protection: IP65, IP67
Impact resistance: IK08
5° optics and 3.5W version: 4000K only CRI 80
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content
Operating temperature: -20°C — +45°C
Maximum device temperature: 50°C (Ta 25°C)
Glow wire test: 960°
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class III
Weight: 470 g
Dimensions: Ø84x67 mm
Cutout dimensions: Ø75 mm
Volume of thermal heatsink: Ø200x140 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WC4020 Outer casing, WE0701S Anti-glare screen, half transparent and half serigraphed black, WE0701S Anti-glare screen, half transparent and half serigraphed black, WG0502 Retaining spring clip Ø75mm, WH0203 Honeycomb louvre , WH0203 Honeycomb louvre , WL0100 Suction cup
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption