Pivot 1.7
projector for outdoor applications
surface mounted (ceiling, wall, ground, spike, strap)
Power consumption: 3,5W (5° optics), 5W, 7W
Power supply: 24Vdc
Lumen output at source: 452 lm (3000K, 5W, CRI >90), 488 lm (3000K, 5W, CRI 80), 608 lm (3000K, 7W, CRI >90), 657 lm (3000K, 7W, CRI 80)
Delivered lumen output: 284 lm (3000K, 34°, 5W, CRI >90), 352 lm (3000K, 34°, 5W, CRI 80), 374 lm (3000K, 34°, 7W, CRI >90), 463 lm (3000K, 34°, 7W, CRI 80)
1 power LED High Intensity, 1/4 ANSI BIN (5° optics), 3-step MacAdam, 50000h L90 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: 5°: optical system consisting of a deep-set, high-efficiency TIR lens, for a clean, aberration-free lighting effect on a very narrow beam, 8°, 11°, 17°, 34°, 43°, 45°, 54°, 15°x47°, 46°x16°: optical system consisting of a deep-set, high-efficiency TIR lens, sharp 21°, sharp 51°: SHARP optical system consisting of a deep-set plano-convex lens for an extremely well-defined light beam
CRI Colour Rendering Index: 80, >90
Body material: body made of ANTICORODAL EN AW 6082 low-copper-content aluminium alloy for excellent resistance to corrosion, made entirely on a CNC lathe
Finishes: jasper green finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1000 hours of salt spray, white finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1000 hours of salt spray (RAL 9003), cor-ten finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1000 hours of salt spray., black anodized aluminium finish obtained by electro-colouring to give the product better heat dissipation and the material corrosion resistance, grey anodized aluminium finish created with anodizing process to improve the resistance to corrosion, anthracite finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1000 hours of salt spray, copper finish obtained through an  initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1000 hours of salt spray
RAL finish on request
Screen material: 4-mm-thick transparent extra-clear glass with vitrified serigraphy, high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches
Seals: the silicone rubber gaskets guarantee maximum resistance to UV rays and unchanging mechanical characteristics over time
power supply unit not included
includes 1.5/5/10/15/20 m neoprene cable, H05RN-F 2x0,35/0,75 Ø6,3 mm
Ingress protection: IP66
Impact resistance: IK07
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content
Operating temperature: -20°C — +45°C
Glow wire test: 960°
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class III
Weight: 400 g
Dimensions: Ø40x75 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WB03105 Standard snoot - jasper green, WB0310A Standard snoot - anodized grey, WB0310E Standard snoot - white, WB0310H Standard snoot - anthracite, WB0310N Standard snoot - black anodized, WB0310T Standard snoot - cor-ten, WB0310U Standard snoot - copper, WB03115 Asymmetrical snoot - jasper green, WB0311A Asymmetrical snoot - anodized grey, WB0311E Asymmetrical snoot - white, WB0311H Asymmetrical snoot - anthracite, WB0311N Asymmetrical snoot - black anodized, WB0311T Asymmetrical snoot - cor-ten, WB0311U Asymmetrical snoot - copper, WH0310 Honeycomb louvre , WP0100 Spike for in-ground installation, WP1004 Fastener strap - 5 m
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption